User manual HOOVER AB130

[. . . ] To ensure safety when disposing of an old washing machine disconnect the mains plug from the socket, cut the mains power cable and destroy this together with the plug. To prevent children shutting themselves in the machine break the door hinges or the door lock. This machine is solely for domestic use, i. To wash, rinse and spin dry household textiles and garments. [. . . ] The first, called Absolute Time Mode (ABSOLUUT), allows you to set the actual time you want the programme to begin or end, e. The second, called Relative Time Mode (RELATIEF), allows you to delay the start or end of your wash cycle by adding hours to the current time displayed on the clock, e. You can select which option you require by pressing the button until your preferred option is displayed, and then pressing the button to accept the option you have chosen. If you wish to change any of the menu settings at a later date, you can enter the menu as 19 Previously described, run through the menu options from the beginning and change whichever options you wish. This may be useful for changing Set New Time when Daylight Saving starts or ends. Once set, the menu options will remain in the memory of the machine even if the machine is unplugged or there is a power cut. The programme selector must be returned to the OFF position to reset the controls between each wash cycle. Turn the machine on by selecting a programme using the programme selector. The display will then indicate the name of the programme, the spin speed and temperature of the wash and this display will remain until you press the button or return the programme selector to the OFF position. After selecting the programme and the required options (see the Wash Options section of this manual), press the button once to start the wash cycle. The display will indicate that the door is locked and the machine will begin to sense the wash load and ask you to wait. This option is available on the Cottons programmes and it increases the number of rinses to five (including the final conditioned rinse). This can help prevent skin irritation from detergent residue, which can affect people with particularly sensitive skin. Selecting the button is also recommended when washing heavily soiled fabrics which need a lot of detergent, or when the wash load contains towelling fabrics that have a greater tendency to retain detergent. This option is only available on the Synthetics, Acrylics, Woolmark and Silk programmes. Programme Synthetics ( 50) Fast Iron function The programme is completed by a short spin, of very low speed. The machine stops in the final rinse stage and the option indicators blink. The load is held in the water in the drum, thus reducing creasing and enabling easier ironing. The machine stops in the final rinse stage and the option indicators blink. The load is held in the water in the drum, thus reducing creasing and enabling easier ironing. The machine stops in the final rinse stage and the option indicators blink. The load is held in the water in the drum, thus reducing creasing and enabling easier ironing. [. . . ] Is there clothing or dirt between the door gasket and the door glass?Ensure that the door glass and gasket are kept clean and free of laundry when loading the machine. Have you selected an option that changes the spin profile ( or change of spin speed using the button)?To reduce noise and vibration and improve the machine's reliability and life, the machine is fitted with an electronic sensor that detects if the load is unbalanced. [. . . ]