User manual HOOVER AE165

[. . . ] If the appliance is installed on a carpeted floor ensure that the ventilation holes on the base of the appliance are not obstructed. N) If the appliance is not running properly or breaks down, switch it off, turn off the tap and do not tamper with the appliance. Consult only the Authorised Technical Support Service for possible repair and ask them to use original spare parts. Failure to comply with the above can compromise the safety of the appliance. [. . . ] Note: only put liquid products in the compartment labelled " ". The machine is programmed to automatically take up additives during the final rinse stage for all wash cycles. POWER JET The HOOVER VISION HD is fitted with an additional pump system called "POWER JET" that sprays water directly into the wash load. This system optimises the dissolving of the detergent and directs it into the garments to be washed. The effect is a perfect wash result, demonstrated by the awarding of the "AA wash classification. During the rinsing cycle the POWER JET constant flow of clean water is used to totally remove all detergent residue from the garments. Auto half load The washing machine is fitted with a self adjusting water level system. This system enables the machine to use the amount of water needed to wash and rinse the laundry in relation to the particular load. This results in a reduction of the water and electricity used, without in any way compromising the washing and rinsing performance. In fact the amount of water and electricity used will always be appropriate for the clothes load. The washing machine automatically ensures excellent washing results at minimum cost whilst respecting the environment . 16 17 Dosages Detergents, washing aids and amounts to use Choice of detergent General purpose detergents Powder detergents, for a thorough wash, with bleaching agent, particularly suitable for use in hot wash programmes (60°C and over), for heavily soiled and stained laundry. Liquid detergents, particularly suitable for grease stains, such as greasy skin marks, cosmetics and oil. These detergents are not suitable for washing stained laundry, as they do not contain bleach. Colour often leaks from new coloured items. This can then colour other lighter items being washed. We therefore recommend that coloured items should be washed for the first time separately. For future washes, colourfast items can only be washed with whites up to 40°C. Do a full load in your washing machine To prevent any possible waste of energy, water or detergent we recommend that you put a full load in your washing machine, not exceed the recommended maximum load size. Up to 50% energy saving can be made with one full load compared to two half load washes - When is prewashing really needed? Only with particularly dirty loads!Energy savings of 5 to 15% are made by not selecting the prewash option for normal soiled laundry. Which wash temperature should you choose? Using stain removers before machine washing reduces the need to wash at temperatures over 60°C. Energy savings of up to 50% can be made by using a 60°C wash temperature rather than 90°C - Note: when sorting laundry check there are no metal objects in the laundry (such as paper clips, safety pins, pins, coins etc. . . ); button up pillowcases, fasten zips, hook & eye fasteners, belts and long dressing gown cords; remove curtain hooks; pay close attention to the labels on items if you notice stubborn stains whilst sorting the laundry, remove them using a special detergent or a special stain remover. - We recommend that you do not do a full load of towelling items only as these become too heavy since they absorb a lot of water. 20 21 The correct way to wash Preparing the laundry A) Select the laundry. Loading the laundry B) Open the porthole. C) Put the laundry in the washing machine. Close the porthole again, ensuring that no items of laundry are obstructing the lock. Putting detergent in machine D) Open the drawer, choose the detergent and put in the correct amount, according to the manufacturer's instructions and the advice on page 18. [. . . ] load of dry laundry Water pressure 8 kg 0, 05 ÷ 0, 8 MPa Measurements Width Depth Height 60 cm 60 cm 85 cm NB: For specifications regarding electrical data, see the data panel on the front of the washing machine (porthole area) - as shown in diagram above. After Sales Service If, having investigated the possible malfunctions on the chart on the previous page, you believe the appliance is not working correctly, please call our After Sales Service dept. on telephone number: EC Appliance complies with European Directive 89/336/EEC, 73/23/EEC and subsequent amendments. Gias Service - Tel: 08705 400 600 (Eire 018301 666) 26 27 Support Service SETTING UP + INSTALLATION 1 Remove the polystyrene base and place the machine near its permanent position (diagram 1). Carefully cut through the hose retaining clip at the rear of the appliance (diagram 2). Unscrew the central bolt (A); unscrew the 4 lateral screws (B) and remove the cross piece (C) (diagram 3). Note: we recommend you keep the transit bracket, braces and screws to immobilise the machine for future transit. [. . . ]