User manual HOOVER CA2IN1D

[. . . ] use only attachments , consumables or spares recommended or supplied by Hoover. Do not use the appliance to clean or direct steam towards animals, people or plants. Liquid or steam must not be directed towards equipment containing electrical components, such as the interior of ovens. Unplug the cleaner and switch off before filling the water container. [. . . ] [1, 2] Assemble the main body of the cleaner to the Triangular Brush. [3] Assemble the main body of the cleaner to the floor Head or assemble the Triangular Brush into the Floor Head*. [4] Steam cleaning hard floor - intensive clean Use the triangular floor brush for hard floors that require deep cleaning. Please note that there is no mop and the area will have to be dried separately. NOTE: Always sweep or vacuum the floor prior to use to remove any loose dirt or debris. Remove the triangular floor brush from the floor head by pressing the release pedal at the rear of the floor head. Plug the steam cleaner into the main power. The power on light (red) will illuminate. After a few seconds the green Steam Ready light will illuminate indicating the cleaner is ready for use. Recline the cleaner by placing a foot on the floor brush and lowering the main body *Certain Models Only 2 GB 4. [16] To produce steam press the trigger release button. [12] Variable steam release control are used to select Low, Medium or High volume of steam, depending on your specific cleaning requirement. [14] Move the cleaner slowly backwards and forwards paying particular attention to high traffic areas. [17] used for cleaning windows, mirrors and other smooth glass surfaces. Choose the steam intensity setting appropriate for the fabric you are steaming. IMPORTANT: ensure that the hose and accessories are securely fastened before using the handheld steam cleaner, if steam escapes from the joint that means the hose and accessories are not correctly fitted, allow the unit to cool then remove and re-fit the hose and accessories. Unplug the cleaner from the mains power and ensure the unit has cooled. Push the release button on the main body to take out the handheld. [19] Pull the cap on the Water Tank to open. [6] Fill the clean water tank with cold tap water. Do not add any chemicals, detergents or perfumes to the clean water tank. Plug the steam cleaner into the main power. [. . . ] It depends on different factors above all how hard the floor is. The best way to understand when to change the mop is when the mop is still dirty after having washed it or if you notice that it doesn’t perform like before. iMPORTANT INFORMATION Hoover spares and Consumables Always replace parts with genuine Hoover spares. These are available from your local Hoover dealer or direct from Hoover. [. . . ]