User manual HOOVER FLASH

[. . . ] HooVEr SErViCE: To ensure the continued safe and efficient operation of this appliance we recommend that any servicing or repairs are only carried out by an authorised Hoover service engineer. Connect the hose to the cleaner main body, ensuring it clips and locks into position. To release: simply press the two buttons on the hose end and pull [2]. [. . . ] the full dust bag should be disposed of correctly and carefully. Fold a new bag as shown on the bag and fit by inserting the collar into the bag holder [14]. Pick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar items. To maintain optimum performance of your cleaner, please wash the pre-motor filter and exhaust filter after each 5 bag changes. to remove the pre-motor filter sliide the pre-motor filter frame from the cleaner. Wash it in hand warm water, and allow it to dry thoroughly before replacing to the cleaner [15]. To remove the exhaust filter, unclip the exhaust filter cover {16] and remove the filter pack wash the foam filter in hand warm water and allow it to dry thoroughly before replacing to the cleaner [17]. Do not try and use the product without a dust bag or filter fitted. To maintain optimum performance we recommend that you wash the permanent bag under handwarm water after every 5 full bags. Remove excess water with a dry cloth and leave to dry fully before replacing. Always replace parts with genuine hoover spares. These are available from your local hoover dealer or direct from hoover. When ordering parts always quote your model number. Check if there is any other blockage in the system - Use a rod or a pole to remove any blockage from the Teletube or flexible hose. [. . . ] Should you have a problem with the product, complete this simple user checklist before calling your local Hoover service. Is there a working electricity supply to the cleaner?The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold. [. . . ]