User manual HOOVER H3W4 37TXME/1-S

[. . . ] We are proud to offer the ideal product for you and the best complete range of home appliances for your daily routine. Carefully read this manual for correct and safe appliance use and for helpful tips on efficient maintenance. Only use the washing machine after carefully reading these instructions. We recommend you always keep this manual on hand and in good condition for any future owners. [. . . ] L This option allows you to choose between 3 levels of wash intensity modifying the length of the programme, depending on how much the fabrics are soiled (can only be used on some programmes as shown in the table of programmes). The machine is fitted with a special electronic device, which prevents the spin cycle should the load be unbalanced. This reduces the noise and vibration in the machine and so prolongs the life of your machine. L This button allows you to change the temperature of the wash cycles. L It is not possible to raise the temperature over the maximum allowed for the programme, in order to protect the fabrics. L If you want carry out a cold wash all the indicators must be off. sPIN SPEED button L By pressing this button, it is possible to reduce the maximum speed, and if you wish, the spin cycle can be cancelled. L If the label does not indicate specific information, it is possible to use the maximum spin expected in the program. To prevent damage to the fabrics, it is not possible to increase the speed over the maximum allowed for the programme. L To reactivate the spin cycle press the button until you reach the spin speed you would like to set. L It is possible to modify the spin speed without pausing the machine. (only available on certain models) l By this option you can add a specific steam treatment to some washing cycles (see programme table). L The steam function relaxes the folds and makes ironing times shorter. L Fibres are regenerated and refreshed, removing all smells from the items. l A dedicated steam treatment was devised for each programme , to guarantee washing top efficiency depending on item fabrics and colours. This option must be selected before pressing the START/PAUSE button. eASY IRON button (only available on certain models) This function allows you to minimizes creases as much as possible, eliminating the intermediate spins or reducing the intensity of the last one. This option must be selected before pressing the START/PAUSE button. If the appliance detects the presence of excessive foam, it may exclude the spinning phase or extend the duration of the program and increase water consumption. Simultaneously pressing the START/PAUSE and OPTIONS buttons allows a previously downloaded cycle to be started whilst the One Touch position is selected on the programme knob (for downloading cycles from the App see the relevant section of this user manual). L Pressing simultaneously the buttons TEMPERATURE SELECTION and SPIN SELECTION for about 3 seconds, the machine allows you to lock the keys. In this way, you can avoid making accidental or unwanted changes if a button on the display is pressed accidently during a cycle. [. . . ] Make sure the washing machine is not in pause or time delay mode. possible causes and practical solutions Make sure the front filter is correctly closed. The machine is fitted with a detection system that protects the load and product from damage if the load is not balanced before spinning. this may result in:· The machine attempts to balance the load, increasing the time of The spin cycle aborting to protect the machine and load. [. . . ]