User manual HOOVER HDI90

[. . . ] In the Filtering version the air and the kitchen fumes that are conveyed by the apparatus are depurated by the charcoal filter and put back into the room through the small grilles of the ventilation flue (Fig. 1A) must be used, which placed at the top of the structure, allows the air to recycle back into the room. In the Ducting version, cooking vapours and odours are conveyed straight outside by a disposal duct which passes through the ceiling (Fig. [. . . ] carefully observe all the indications for final positioning of the apparatus. Take into account that one of the template axes must correspond to the axis of the hood controls. Fix the bracket to the ceiling using the screws and screw anchors provided (Fig. Be careful, because the position of the bracket determines the final position of the apparatus. ducting version: Fix the upper flue to the bracket by means of the four screws provided (Fig. 6), with the grilles facing down, then take the lower flue and insert it in the upper one (Fig. Adjust the height of the flues with the eight retaining screws (Fig. 7A) taking into account that the distance between the hood and the hob must be at least 650 mm (Fig. Take the flange with the metal valve (Fig. 9H) and assemble it onto the opening of the hood for air venting, pressing slightly. Now make the electrical connection A and connect the air exhaust pipe to the flange B holding the hood raised (Fig. Lift the island and rest it against the lower flue, then fix the parts with the eight screws provided (Fig. At this point the installation is complete and the grease filters can be remounted. filtering version: After fitting the bracket to the ceiling , install the baffle (Fig. [. . . ] 15) and rotate the filter downward until the 2 tabs can be removed from the housing. The charcoal filter must be replaced according to use: on average once every 6 months. 17: to change the halogen lamps open the cover levering from the proper slots. [. . . ]