User manual HOOVER HF7 12 I

[. . . ] Please read and follow these instructions carefully and operate the machine accordingly. This booklet provides important guidelines for safe use, installation, maintenance and some useful advice for best results when using your machine. Keep all documentation in a safe place for future reference or for any future owners. Note: this machine is solely for domestic use, i. [. . . ] After you have set the programme and option buttons you require, press the start button. Press the programme lock button and this "locks" the control panel. After you have set the programme and option buttons you require, press start and then the programme lock button. this "locks" the control panel. You may cancel this function by pressing the programme lock button briefly until you see the light above the button flash. While this light is flashing, press the "Fast Iron" button ­ the display will inform you that the options are no longer locked and further changes can now be made. The Programmation Fin De Cycle/Départ Différé options can be used if you want the washing to be ready at a later time (but within 24 hours). Press Départ Différé/Programmation Fin De Cycle button once and press the hours and minutes buttons (to the left and right) until the required time is set. Press Départ Différé/Programmation Fin De Cycle button twice and press the hours and minutes buttons (to the left and right) until the required time is set. When entering the option, the display will show the minimum time which you can set the programme to end by. This time may only be extended as you require. NOTE: When using the Départ Différé/Programmation Fin De Cycle functions, only use detergents via the dispenser drawer. To the drum and then leaving them to stand for a long period of time may damage your laundry. On selecting the wash programme the display will inform you of the maximum spin speed permitted for that programme. by repeatedly pressing the select spin button the speed will decrease by increments of 100 rpm. By continuously pressing the spin speed option the spin may be cancelled if desired. On selecting the required spin speed the display will then inform you of the chosen programme, its temperature and the newly selected spin speed. Note: this model is fitted with an electronic "sensor" Note: this model is fitted with an electronic device that device that checks balancedis balanced correctly. Is the checks the load is the load correctly. If the load If load is slightly unbalanced the machine will re-balance slightly unbalanced the machine will re-balance it it automatically to then carry out the normal spin. Automatically to then carry out the normal spin. If, after several attempts, balance is not restored aa If, after several attempts, balance is not restored, reduced spin speed will be used. [. . . ] If there is a power failure the wash cycle will be interrupted, the wash programme and functions will be suspended. When the power is restored, the wash programme and functions will re-start from the same point and complete the programme. The load can be removed from the machine during a power failure as follows: The water can be drained from the machine by: 1. Switch off the machine by the control knob and at the mains power supply. [. . . ]