User manual HOOVER HNL21X6

[. . . ] Instruction Book ® Contents Introduction . 8 Connection of the machine to the drain . 25 Cleaning and Routine Maintenance . 33 2 Introduction Please read and follow these instructions carefully and operate the machine accordingly. [. . . ] By selecting the Time Saver option, the wash time may be reduced by up to 50 minutes, depending on the selected programme, temperature and load, without giving up a good wash quality. Pure Rinse This option is available on the cottons programmes. The option increases the number of rinses to five (including the final conditioned rinse). This can help prevent skin irritation from detergent residue for people with particularly sensitive skin. Selecting the Pure Rinse button is also recommended when washing heavily soiled fabrics which need a lot of detergent, or when the wash load contains towelling fabrics that have a greater tendency to retain detergent. Fast Iron This option only is available on synthetics, acrylics, woolmark and silk programmes. Programme Synthetics Fast Iron Function Programme is completed by a short, very low spin speed. The machine stops in the final rinse stage with the option indicators blinking and the load will be held within the water in the drum, thus reducing creasing and enabling easier ironing. Action to complete the cycle If a spin cycle is required please select the appropriate spin (see Programme Guide). Press the FAST IRON button to continue with the programme. The machine will then pump out the remaining water and the programme will conclude with a short spin. Finally, the programme carries out a brief tumbling action to loosen the items in the load. Acrylics Woollens Press the FAST IRON button and the machine The machine will stop in the final rinse stage with the option indicators will pump out the water and complete the cycle with a short spin cycle. blinking and the load will be held within the water in the drum. This reduces creasing, thus enabling easier ironing. The machine will stop in the final rinse stage with the option indicators blinking and the load will be held within the water in the drum. This reduces creasing, thus enabling easier ironing. Press the FAST IRON button and the machine will pump out the water to complete the cycle. The clothes load will not be spun and will therefore be very wet. Silk 18 Temperature Selector The washing machine is equipped with a Temperature Selector knob to set the temperature you require. Bigger energy savings can be achieved by using the lower temperature settings around the dial between and 40°C. By selecting the position, the wash temperature is limited to the water inlet temperature, thus reducing energy consumption further. We recommend that the temperature shown on wash care garments should never be exceeded. In the case where the temperature has been accidentally set higher than that of the chosen programme, (see Programme Guide table), the machine will lower the temperature automatically to protect the fabrics. Spin Speed Selector (this feature is only available on certain machines) By adjusting the control knob it is possible to reduce the maximum spin speed of your selected programme to suit your needs and to help reduce any creasing of fabrics. Turn the spin speed selector knob until the indicator aligns with the required spin speed. The maximum spin speed will vary depending on the specification of the machine. Automatic Features Automatic Variable Capacity (Half Load) The washing machine is fitted with a self adjusting water level system. [. . . ] Carefully move the machine so the rear of the machine is accessible. Please follow the safety precautions which we recommend under the Safety Notes section of this manual. Unclip the drain hose from the rear panel of the machine and lower the hose into a bowl on the floor. When the bowl is full raise the end of the drain pipe to a height higher than the top of the appliance to stop the flow of water. [. . . ]