User manual HOOVER HW355

[. . . ] Please read and follow these instructions carefully and operate the machine accordingly. This booklet provides important guidelines for safe use, installation, maintenance and some useful advice for best results when using your machine. Keep all documentation in a safe place for future reference or for any future owners. Please check that the following items are delivered with the appliance: Instruction manual Guarantee card Blanking plug Inlet hose & hooked end support (see Unpacking and Installation Instructions) Base panel & x2 push clips Energy Label Your local council will be able to give you details of current means of disposal. [. . . ] the selection of the time is completed by pressing the Départ Différé button , the TEMPS RESTANT display will indicate the time selected. When the correct delay is selected press the Départ/Pause button to start the cycle. The option increases the number of rinses to five (including the final conditioned rinse). This can help prevent skin irritation from detergent residue for people with particularly sensitive skin. Selecting the Extra Rinçage button is also recommended when washing heavily soiled fabrics which need a lot of detergent, or when the wash load contains towelling fabrics that have a greater tendency to retain detergent. This option can be utilised on all programmes. By selecting the Lavage à Froid option the wash temperature is limited to the water inlet temperature thus reducing energy consumption. This option is only available on synthetics, acrylics, woolmark and silk programmes. Fast Iron Function Programme is completed by a short, very low spin speed. The machine stops in the final rinse stage and the option indicators blink. The load is held in the water in the drum, thus reducing creasing and enabling easier ironing. The machine stops in the final rinse stage and the option indicators blink. The load is held in the water in the drum, thus reducing creasing and enabling easier ironing. The machine stops in the final rinse stage and the option indicators blink. The load is held in the water in the drum, thus reducing creasing and enabling easier ironing. The machine will then pump out the remaining water and the programme will conclude with a short spin. Finally, the programme carries out a brief tumbling action to loosen the items in the load. Press the Repassage Facile button and the machine will pump out the water and complete the cycle with a short spin cycle. Press the Repassage Facile button and the machine will pump out the water to complete the cycle. The clothes load will not be spun and will therefore be very wet. The Hoover Sensor Washer Dryer gives many options for drying the laundry to suit all circumstances. The table below lists the programmes and the function of each programme. [. . . ] Turn the machine to ARRÊT to reset the machine and this will allow the door to open. Check the drawer is aligned properly Check the drawer is not clogged with detergent (see Cleaning and Routine Maintenance) The machine is designed to vent through the drawer, this is nothing to worry about. Was sufficient time or automatic setting selected to dry the clothes load?) Is the wash programme selected followed automatically by a drying programme? [. . . ]