User manual HOOVER ND4 H7A1TCEX-S

[. . . ] We are proud to offer the ideal product for you and the best complete range of home appliances for your daily routine. Please read and follow these instructions carefully and operate the machine accordingly. This booklet provides important guidelines for safe use, installation, maintenance and some useful advice for best results when using your machine. Keep all documentation in a safe place for future reference or for any future owners. [. . . ] When the cycle has been completed, turn off the machine by turning the programme selector to the OFF position. L Download the Hoover Wizard App on your device. The Hoover Wizard App is available for devices running both Android and iOS, both for tablets and for smartphones. L To exit REMOTE CONTROL mode while a cycle is underway, turn the programme selector to any position other than REMOTE CONTROL (Wi-Fi), without going through the OFF. The control panel on the appliance will be operative once again. Get all the details of the Wi-Fi functions by browsing the App in DEMO mode. The frequency of the home Wi-Fi network has to be set on the 2. You can not configure the machine if your home network is set to the 5 GHz band. L Open the App, create the user profile (or log-in if it is already created previously) and pairing the appliance following the instructions on the device display or the "Quick Guide" attached on the machine, or at the link: go. L With the door closed, turn the programme selector to the REMOTE CONTROL (WiFi) position to control the appliance using the app once again. if there is a cycle underway , it will continue. With the door opened, the REMOTE CONTROL will be disabled. To enable it again, close the door, turn the programme selector to any position other than REMOTE CONTROL and then select it again. L Check that the router is switched on and connected to the Internet. L Turn the programme selector to the REMOTE CONTROL (Wi-Fi) position : the controls on the control panel will be disabled. Open the door and load the drum with laundry. Ensure that garments do not hinder closure of the door. Gently close the door pushing it slowly until you hear the door 'click' shut. Turn the Programme Selector dial to select the required drying programme (see the table of programmes). If the door is opened during the programme to check the laundry, it is necessary to press programme start to recommence drying after the door has been closed. When the cycle is nearing completion the machine will enter the cool down phase, the clothes will be tumbled in cool air allowing the load to cool down. Following the completion of the cycle the drum will rotate intermittently to minimize creasing. [. . . ] The time to end is continuously checked during the drying cycle and the time is adjusted to give the best estimation time. The displayed time may increase or decrease during the cycle and this is normal. Drying time is too long/clothes are not dry enough. L Have you selected the correct drying time/programme? [. . . ]