User manual HOOVER PRB2500

[. . . ] This product has been designed for domestic use only. In case of any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer is not responsible and the guarantee will not apply. Before connecting your appliance, check if the mains voltage is the same as the voltage indicated on your appliance and that the power outlet is connected to the earth. Ensure before each use that the electric cord or any Other important part is not damaged. [. . . ] The first time the appliance is used, some fumes, dust and a smell should appear. It's quite normal and will quickly disappear. This is due to a treatment applied to the soleplate that improves the steam performance. Before use, please use the iron as described in Chapter 2. Select the temperature of the soleplate by turning the dial (12) on the iron to the desired position. Wait a few moments until the iron light (10) is off. This indicates that the soleplate has reached the required temperature. While Ironing, the Iron light may switch on and off, this indicates that the temperature is being Adjusted automatically to maintain temperature so as not to interrup your ironing. Help To know the best suitable temperature for each textile, check the laundry care label of the article to be ironed. Please note that during use, the temperature light goes on from time to time. It signifies that the iron is heating up to the set temperature. When ironing material with mixed fabrics, always ensure the temperature is set to the correct setting. If you select a lower temperature while ironing, wait until the iron has cooled down to the set temperature before you continue ironing. If the temperature is too low, some drops of water could escape from the soleplate. Please raise up the temperature above the 2 dots (· Select the temperature of the soleplate following the indications of chapter 2. Start your ironing without pressing the steam ON/OFF button (15), when the soleplate reaches the appropriate temperature. Select the temperature of the soleplate following the indications of chapter The steam will be ready to be used after press "steam ON/OFF" button, When steam ready light (14) disappear. From that time you can begin ironing and use the steam trigger. The steam flow stops When you release the trigger. During use, it is normal to experience some noise coming from your steam generator. It signifies that a pump injects water into the boiler. It's better to avoid using the steam trigger at this precise moment to avoid pressure falls. [. . . ] When ordering spare parts, always check your model number. Hoover Service Should you require service at any time, please contact your local Hoover Service Office. Please see all the contact details below. Safety Hoover believes that independent approval is the best way of demonstrating safety in design and manufacture. [. . . ]