User manual HOOVER S2IN1300C

[. . . ] A O B ® C N M P USER MANUAL D L E F G H I J W Q K V Y R S T U ® PRINTED IN P. R. C. 48010877 X 1 2 3 12 13 14 15 4 5 6 7 8 9 10 11 GB INSTRUCTIONS FOR SAFE USE This appliance should only be used for domestic cleaning, as described in this user guide. Please ensure that this guide is fully understood before operating the appliance. Always switch off and remove the plug from the socket after use, or before cleaning the appliance or any maintenance task. [. . . ] MOP HEAD [2] 1. Align Mop Head with main unit as shown, so that neck is in line with Steam Nozzle. 2. Slide Mop Head neck into the cleaner main body , until release button snaps through hole. 3. To remove Mop Head, press firmly on release button while simultaneously pulling Mop Head. USING YOUR CLEANER BEFORE YOU BEGIN CLEANING IMPORTANT: Always unplug the cleaner when adding water or changing a textile pad. NOTE: Wash the textile pad prior to use to remove any lint. Make sure Steam Control Dial is set to “OFF” position. Rotate Water Tank Cap one quarter turn in “Unlock” direction (anti-clockwise) indicated by illustration on Cap, and remove. 2 GB 3. Carefully fill Measuring Cup with maximum amount of water 450 ml and pour into Water Tank through the fill hole. DO NOT Exceed the “MAX” water line on the water tank. NOTE: In order to significantly reduce mineral build-up and prolong the life of your steam mop the use of distilled or de-mineralized water in the unit is highly recommended. Replace Water Tank Cap so that thread grooves on the bottom of Cap align with tabs inside fill hole. Press Water Tank Cap down so that it sits flush with top of fill hole. Rotate one quarter turn in clockwise direction (as indicated by “Lock” illustration on Cap) to lock it in place. NOTE: The tube which transfers water from the Water Tank to the boiler is weighted down with a brass ball. This is an intentional design to improve efficiency of water usage. It is normal for this ball to create a rattling sound inside of Water Tank during use. GENERAL OPERATION NOTE: Be sure that the Water Tank has been filled and all desired accessories are connected before following these steps. Plug power cord into a convenient electrical outlet (a properly rated extension cord may be used if necessary). Turn Steam Control Dial clockwise from “OFF” to “MAX”, Power light will illuminate in red. [9] NOTE: The desired steam intensity setting depends on the current steaming task. After approximately 30 seconds, the indicator light in blue color will be illuminate & you will hear a buzzing sound as unit begins to emit steam. Direct Steam Nozzle (with any connected accessories) towards surface you wish to steam. CAUTION: Always be sure that Steam Nozzle and any accessories are pointed in a safe direction (away from yourself, other people, pets and plants) when steam is being emitted. METHODS OF USE FOR STEAM MOP Please inspect carefully if the Extension Pole, Mop Head and Micro-fiber Mop Pad are assembled correctly. [. . . ] The Utility Head with Small Cloth is to be used for removing wrinkles from different fabrics. Choose the steam intensity setting appropriate for the fabric you are steaming. EXTENSION HOSE [13] You can install either the Jet Nozzle or Utility Head on the Extension Hose and install the Extension Hose on the Steam nozzle of main body for extensive reach and lighter weight while using as handheld steam cleaner. 3 cleaner maintenance IMPORTANT: Always ensure the cleaner has fully cooled down before performing any maintenance tasks. The textile pad won’t pick up dirt. •  The cleaning pad may already be saturated with dirt and needs to be washed. [. . . ]