User manual HOOVER S4396

[. . . ] Louis Park, MN 55426 (952) 935-0091 (952) 935-0462 fax 2256 Waycross Rd. Forest Park, OH 45240 (513) 522-7575 (513) 522-7580 fax 7714 B Montgomery Rd. Cincinnati, OH 45236 (513) 791-7930 (513) 791-7934 fax 5160 Great Northern Plaza North Olmsted, OH 44070 (440) 734-2755 (440) 734-2799 fax 5831 Sawmill Rd. Columbus, OH 43017 (614) 760-9399 (614) 760-9331 fax 104 Boardman-Poland Rd. [. . . ] To unplug, grasp the plug, not the cord. Never handle plug or appliance with wet hands. · The use of an extension cord is not recommended. · Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a Hoover Sales and Service Center or Authorized Hoover Warranty Service Dealer. · Use vacuum cleaner only for its intended use as described in the instructions. · Use only attachments recommended by Hoover; others may cause hazards. · DO NOT PULL/DRAG the cleaner across hard floor surfaces when the cleaner is turned off. · Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing. SAVE THESE INSTRUCTIONS Contents Important safeguards . 10 Parts & accessories mail reorder form . Adjust the wand to the desired length by pushing forward on the wand grip. Tool Holder - Tools are easily accessible and ready to use for all your cleaning needs. The tool holder fits both on the extension wand or on the canister handle, so you can store tools where you like. Extra Filter Bag - (one installed in cleaner) The HEPA filtration bag traps 99. 98% of all particles down to 0. 3 microns. Extra Secondary Filter - (one installed in cleaner) The secondary filter, located in the bag compartment, protects the motor from dirt particles. B C D E F G I H J K 4 Attach hose, wand, tools and nozzle A 1-2 Attach hose Insert hose connector (A) into opening (B) in bag lid, aligning tabs on hose connector with slots in opening. To remove hose, twist hose connector clockwise and pull up. B C 1-3 Attach wand To attach wand to hose, push wand firmly onto hose; twist wand to tighten. Adjust the telescoping wand to the desired length by pushing forward on the wand grip. Release grip to lock the wand into position. 1-4 Attach tools and nozzle To attach tool to the hose or wand, firmly push tool onto hose or wand. Twist tool slightly to tighten or loosen connection. To attach either nozzle to the wand, push the nozzle firmly onto the wand. Twist nozzle slightly to tighten or loosen connection. 2. [. . . ] It's making a bad noise There may be an internal fault, or something stuck inside. We recommend you turn the unit off, unplug and take it to a Hoover Sales and Service Center or Authorized Hoover Warranty Service Dealer (Depot). What does it mean?What should I do? What's the problem?I need a new bag New bags can be purchased at your local HOOVER Sales and Service Center. Clearing blockages Low suction or pick up may be due to a blockage in the system. [. . . ]