User manual HOOVER SCD 1600

[. . . ] Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. HOOVER SERVICE:To ensure the continued safe and efficient operation of this appliance we recommend that any servicing or repairs are only carried out by an authorised Hoover service engineer. IT is important that you do not: •  •  •  •  •  •  •  •  •  •  The filling aperture must not be opened in use Leave the cleaner unattended while switched on. [. . . ] [5] IMPORTANT: Always unplug the cleaner and press the steam release trigger to release any remaining steam pressure before adding water. Note: the concentration tool must be attached before fitting any other small tools. concentration nozzle Window Tool Upholstery Tool Plastic Brushes Metal Brush angled Nozzle Scraper tool Use on heavily soiled areas such as showers , kitchens. [15] Use on windows and mirrors for a smear free clean. [16] Use the upholstery cloth over the window tool for use on sofas and chair fabrics. [21] Steam cleaning hard floors IMPORTANT: Always unplug the cleaner and press the steam release trigger to release any remaining steam pressure before adding water or changing a textile pad or accessory tool. Ensure the floor head is connected to the extension tube. Place the floor head onto the floor cloth. Lift the levers on either side of the floor head to secure each end of the floor cloth in place. [12] Plug the steam cleaner into the main power and switch on. [8] After a few minutes the green steam ready light will illuminate indicating the cleaner is ready for use. [8] Release the steam handle safety latch. [9] To produce steam press the steam trigger button. [10] If necessary adjust the variable steam dial to adjust pressure. [11] Move the cleaner slowly backwards and forwards paying particular attention to high traffic areas. Remove the floor cloth from floor head and use brush for stubborn dirt. IMPORTANT: Always unplug the cleaner when adding water, changing a textile pad or accessory tool. Cleaner maintenance IMPORTANT: Always ensure the cleaner has fully cooled down before performing any maintenance tasks. Unplug the cleaner from the main power and ensure the unit has cooled. Hold the steam trigger down to release any remaining steam pressure. [10] Put the steam handle safety latch on. [5] Remove the clean water tank cap [6] , lift the cleaner and empty any remaining water [22]. [. . . ] [9] Trykk på utløserknappen for damp for å slippe ut damp. Bekanta dig med dammsugaren Justerbar ångvrede Indikatorlampa för vattenbrist (Gul) Indikatorlampa på (Röd) På/av-knapp Indikatorlampa för ånga klar (Grön) Lock för vattenbehållaren Bärhandtag Verktygsförvaring Huvuddel Förlängningsrör (3st) Golvmunstycke Duk till golvmunstycke (x1) Kontakt för golvmunstycke Klädseltyg (x1) Fönster/klädselverktyg Metallborste vinklat munstycke Liten borste Stor borste Skrapverktyg Koncentreringsmunstycke tratt Mätkanna Ångvred Slang Ångutlösare Säkerhetsspärr Frigörningsspak till förlängningsrör VARNING: Ström kan vara mycket farligt. [13] Push the desired small tool onto the concentration tool aligning the arrows. Se till golvmunstycket är ansluten till förlängningsröret. [. . . ]