User manual HOOVER SM156DPN4 JAZZ

[. . . ] Never charge the batteries in temperatures above 37°C or below 0°C. Plug the charger in to suitable socket outlet and connect the charger cable to the [H] Charger Base. Ensure the product on/off switch button is at the “OFF” position, place the cleaner into the charger base, ensuring the shroud covers the back of the product. The charging LED indicator** will flash to advise that the product is charging. [. . . ] Note: Should you experience any difficulty in dismantling the unit or for more detailed information on treatment, recovery and recycling of this appliance, please contact your local city office or your household waste disposal service. 2 GB FEATURES A On/Off Switch** B LED Display* C LED Charging Indicator** D Removable Crevice Tool E Suction Inlet F Power Nozzle* G Dust Bin Flap H I J K L M N Charger Base Cardboard Ruler Charger Dust Brush Dust Bin Open Trigger Flexible Hose* Crevice Brush* STORAGE/CHARGING Unit Storage The product is designed to sit in the charging base on a flat surface or vertically if wall mounted. [1] For tidy storage wrap excess cord on the back of the charging base and exit either side or bottom. to Wall Mount (Tools required: Screwdriver and drill) 1. Place the cardboard ruler against the mounting surface. Position base into the insert screws, and move down to ensure the base is fixed firmly to the wall. Charging & LED Indicator** Ensure the product on/off switch** button is at the “OFF” position, then place the cleaner into the base, ensuring the shroud covers the back of the product. The charging LED indicator** will flash to advise that the product is charging. When the product is fully charged and is still positioned on the charger base, the icon will stop flashing and remain lit. The charging LED indicator** will illuminate red all the time to advise that the product is charging. When the product is fully charged and is still positioned on the charger base, the red led will remain on. Note: Use only the charger supplied with your cleaner to recharge the unit. IMPORTANT: Before first use, charge your cleaner for at least 24 hours. When charging the cleaner, the power switch must be off. It is normal for the charger to become warm to the touch when charging. If the operating time reduces after repeated use, let the cleaner run until it stops, then recharge for 24 hours and repeat this monthly for best results. Never charge the batteries in temperatures above 37°C or below 0°C. Remove the cleaner from the storage base. Push the switch** to ‘ON’ position to begin cleaning and to turn off move the switch** to the ‘OFF’ position. For the cleaner with Power Nozzle*, push the switch** to “1” position to begin cleaning and to turn off move the switch** to the “0” position, push the switch** to “Power Nozzle Icon ” to turn on the power nozzle. Empty and clean the unit and filter after each use. To empty the bin pull the bin open trigger, the dust bin flap will open and stop about 45 °position for debris to empty easily. [. . . ] Opladnings-/LED-indikator** Sørg for at produktets tænd/sluk knap** er i ‘OFF’-positionen, placér apparatet i opladningsenheden, og sørg for at kanten dækker bagsiden af apparatet. Skub knappen** til ON for at starte rengøring, og flyt knappen** til OFF for at slukke. For støvsuger med mundstykke* skubbes knappen** til stillingen “1” for at starte rengøring, og flyt knappen** til stillingen “0” for at slukke. Skub knappen** til “Mundstykke-ikonet ” for at tænde for mundstykke. [. . . ]