User manual HOOVER SP 36

[. . . ] HooVEr SErViCE: To ensure the continued safe and efficient operation of this appliance we recommend that any servicing or repairs are only carried out by an authorised hoover service engineer. On/Off Button Stretch flexi tube Bin release button Bin inlet Bin handle Product neck cord grip 3in1 tool: ha. Dusting Brush carry handle upper cord hook flexi tube handle lower cord hook flexi tube handle location electric power nozzle socket* Blockage inspection hose dust bin Airvolution unit handle filter pack filter release latch Airvolution system Bin empting latch dust container door carpet and floor nozzle wa. Locking pedal floor polisher* Parquet caresse nozzle* Mini-turbo nozzle* electric power nozzle* AAa. [. . . ] ⷠPick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar items. ⷠSpray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours as this may cause risk of fire / explosion. ⷠRun over the supply cord when using your cleaner or remove the plug by pulling on the supply cord. ⷠStand on or wrap the power cord around arms or legs when using the cleaner. ⷠUse the appliance to clean people or animals. To avoid a safety hazard, an authorised hoover service engineer must replace the supply cord. 2a) and fix in position with the supplied screw. 9) you are immediately ready to use it alone or combined with the accessories, as desired: · 10) important - when using cleaning tools, the cleaner must be kept in the upright position, and held. If needed, the floor Polisher has to be attached underneath the carpet and floor nozzle. The floor polisher is ideal to polish hard floor, marble and wooden floor. For models equipped with electric power nozzle*: The electric power nozzle has to be secured to the product neck as per the carpet and floor nozzle, but the electrical connection must be inserted to electric power nozzle socket. Remove excess water by shaking and leave to dry for 24 hours. Wash the Blue hePA filter thoroughly from the inside under hand warm water until the water runs clean. Remove excess water by shaking and leave to dry for 24 hours. When completely dry reassemble and refit filters to cleaner. Important - Switch the cleaner off and remove the plug from the electricity supply before checking cleaner. Important - for optimum performance, shake off excess dust from the filters regularly. We recommend that the GRey foam filter and the Blue hePA filter are washed every 3 MONThS. Note: do not use the cleaner without filters assembled. 15) use a cloth or the dusting brush to remove excessive dust from the Airvolution unit surface. Should you have a problem with the product, complete this simple user checklist before calling your local hoover service. ⷠIs there a working electricity supply to the cleaner? [. . . ] Always replace parts with genuine hoover spares. These are available from your local hoover dealer or direct from hoover. When ordering parts always quote your model number. Should you require service at any time, please contact your local hoover Service Office. [. . . ]