User manual HOOVER SSNV1400

[. . . ] 48009199/01 11 1 2 1 2 2 2 1 1 15 2 1 2 3 4 13 14 16 1 1 2 2 1 2 5 6 7 8 17 18 19 20 2 9 10 11 12 21 1 GB INSTRUCTIONS FOR SAFE USE Do not stand on or wrap the cord around arms or legs when using your appliance. Do not position the appliance above you when cleaning the stairs. When using the cleaning tools ensure to always steady the appliance with your other hand. This will ensure that the appliance does not fall while in use. [. . . ] [12] Replace the cap and return to the cleaner. Removing and cleaning the textile pad Unplug the cleaner from the mains power and ensure the unit has cooled. If necessary remove the carpet glider, then peel the textile pad from the floor base. [13] Wash the textile pad in a washing machine with a mild detergent at max temperature 40°c. IMPORTANT: Do not use bleach or fabric softener when washing the textile pad. Steam mode IMPORTANT: Always unplug the cleaner when adding water or changing a textile pad. NOTE: Always sweep or vacuum the floor prior to use to remove any loose dirt or debris. IMPORTANT: Do not use the cleaner without a textile pad attached to the floor head. NOTE: Do not use the carpet glider when cleaning hard floors. Attach textile pad to the base cover, then fix the base cover to main body. [3] Remove the clean water tank from the cleaner main body. [4] Remove the cap and Empty the dust cup 1. Press the dust cup latch [14] and remove dust cup assemlby. [16] Empty the cone filter 2 Lift the filter frame out from the top of the dust cup and remove the filter layers from the filter frame. [17] Wash it in warm water [18], and allow it to dry [19] thoroughly before replacing to the cleaner. To reattach the dust cup cover, align the indicators that are printed on the rear of the dust cup and cover. Turn the cover clockwise and make sure the solid arrows are aligned before reinserting the dust cup into the vacuum. [20] To replace the dust cup in to the unit, gently push the dust cup assembly down and the dust cup will click into place. [21] How often should I replace the mop?It depends on different factors above all how hard the floor is. The best way to understand when to change the mop is when the mop is still dirty after having washed it or if you notice that it doesn’t perform like before. Important Information TROUBLESHOOTING Should you have a problem with the product, complete this simple user checklist before calling your local Hoover service. [. . . ] The steam indicator lights will flash, push steam adjust button to select steam rate. The steam indicator lights will flash, push steam adjust button to select steam rate. The steam indicator lights will flash, push steam adjust button to select steam rate. The steam indicator lights will flash, push steam adjust button to select steam rate. [. . . ]