User manual HOOVER SSS1500C

[. . . ] Cleaning and user maintenance shall not be made by children without supervision. HOOVER SERVICE:To ensure the continued safe and efficient operation of this appliance we recommend that any servicing or repairs are only carried out by an authorised Hoover service engineer. Assembling your Cleaner Remove all components from the packaging. 1. 2. insert the screw into the handle and tight it. [1] Insert the handle into the cleaner main body until it locks into position. [2] USING YOUR CLEANER BEFORE YOU BEGIN CLEANING IT is important that you do not •  •  •  •  •  •  •  •  •  •  The filling aperture must not be opened in use Leave the cleaner unattended while switched on. [. . . ] [7] 1 GB 2. 3. To produce steam recline the cleaner by placing a foot on the floor head and lowering the main body towards the floor. [8] Move the cleaner slowly backwards and forwards paying particular attention to high traffic areas. [9] TROUbLE ShOOTiNG Should you have a problem with the product, complete this simple user checklist before calling your local Hoover service. •  Check the unit is plugged in. •  Check the power cord The steam stick is not producing steam. •  There may be no water in the clean water tank. •  You may not wait for enough time (30 seconds) when switch on. •  Steam cleaner may not be reclined; it doesn’t produce steam in upright position. The textile pad won’t pick up dirt. •  The cleaning pad may already be saturated with dirt and needs to be washed. Refer to the Maintenance section. Refreshing carpets NOTE: Always sweep or vacuum the floor prior to use to remove any loose dirt or debris. IMPORTANT: Do not use the cleaner without a textile pad attached to the floor head. 1. Attach the carpet glider to the floor head. [10] 2. Plug the steam cleaner into the main power. The power lamp will illuminate after 30 seconds. 3. To produce steam recline the cleaner by placing a foot on the floor head and lowering the main body towards the floor. [8] 4. Move the cleaner slowly backwards and forwards paying particular attention to high traffic areas. [9] cleaner maintenance IMPORTANT: Always ensure the cleaner has fully cooled down before performing any maintenance tasks. Cleaning faqs When is Steam Express ready?Approximately 30 seconds after switch on. Can I use Steam Express on all floor surfaces?On all hard floors like marble, ceramic, stone, linoleum, sealed hardwood floors and parquet. Does Steam Express emit steam automatically? [. . . ] Quality Hoover’s factories have been independently assessed for quality. Our products are made using a quality system which meets the requirements of ISO 9001 The Environment: The symbol on the product indicates that this product may not be treated as household waste. Instead it shall be handed over to the appliance collection point for recycling of electrical and electronic equipment. Disposal must be carried out in accordance with the local environmental regulations for waste disposal. [. . . ]