User manual HOOVER TC 5235

[. . . ] € Fit extension tubes (F1), floor nozzle (F2), or other accessories as required for use. € Your Sensory Dust Manager Cyclonic is now ready for use. Extract the plug and pull out all of the cord. FEATURES – DEPENDING ON MODEL, • Hoover’s unique Dust Manager Cyclonic cassette is the bagless system that separates and collects the dust from the air thanks to its internal centrifugal force thus ensuring maximum hygiene and environment safeguard. [. . . ] Shake the Cyclonic Cassette if required or use a brush to remove any of the remaining dust or debris (Q, and R). € To close the Cyclonic Cassette locate the cover rear guides onto the container then close firmly. € Return the Cyclonic Cassette to its original position in the cleaner. FILTER MAINTENANCE To maintain the best performance, we would recommend that you wash the Cyclonic Cassette filters every month removing even the finest dust retained in them. To wash and optimise the performance the following simple steps should be taken: • Shake out the Cyclonic Cassette to remove large dirt and debris (Q) as described in “Emptying The Dust Manager Cyclonic Cassette. € • Brush the inside of the Cyclonic Cassette to remove the fine dust that may have formed on the walls of the Cyclonic Cassette (R). € Push the latch to remove the bottom filter grill (T). € Remove both filters from the filter grill (U). • Rinse both filters under hand warm water (V). € Remove excess water with a dry cloth and leave to air dry for 24 hours or until fully dry. € After completing the washing and drying operations, locate the filters in their original position. Return the Cyclonic Cassette to its original position. To maintain best performance we recommend that you wash the filters in the cleaner every month. € Do not scrub the filters, use washing up liquid or place in a dishwasher. GB • Remove excess water with a dry cloth and leave to air dry for 24 hours or until fully dry (Y). € After completing the washing and drying operations, locate the filters in their original positions in the cleaner. REMOVING A BLOCKAGE FROM THE SYSTEM If there is a noticeable drop in the performance see the following 2 points: 1) Check if the Cyclonic Cassette is full (If so refer to chapter “Emptying The Dust Manager Cyclonic Cassette” 2) If not full then: a) Have you cleaned the Cyclonic Cassette filters recently?If not please refer to the chapter “Filter Maintenance”. B) Check if there is any other blockage in the system. € Use a rod or pole to remove any blockage from the tubes and flexible hose. € It may also be possible to remove an obstruction in the flexible hose by lightly squeezing or bending it. € Check and clean if required the underside of the nozzle by using the crevice tool. [. . . ] The bill of sale or receipt must be produced when making any claim under the terms of this guarantee. GIAS Customer Service 08705 400 600 Hoover Spares 01204 556 111 Quality: Our UK factories meet the strict quality standards of the British Standards Institution (BSI). Safety: We gain independent approval from BEAB to demonstrate that our domestic electrical appliances are safe. BEAB – the British Electrotechnical Approvals Board – ensures that European safety standards are met and maintained throughout the production life of an appliance. [. . . ]