User manual HOOVER TMI2003 011 MISTRAL EASY PARQUET

[. . . ] HOOVER SERVICE: To ensure the continued safe and efficient operation of this appliance we recommend that any servicing or repairs are only carried out by an authorised Hoover service engineer. Cleaner main body On-Off / Variable Power Control Roller Dust container Dust container Release Buttons Hose Latch Handle Telescopic Tube Telescopic Tube Adjusters Hose Handle Hook Telescopic Tube Parking Hook Hose Release Buttons Pre-motor Filter Exhaust Filter Exhaust Filter Cover Release Button Carpet & Floor Nozzle** Floor Type Selector Pedal Crevice Tool Dusting Brush Nozzle Parking Slot Telescopic Tube Parking Slot Parquet Nozzle** Pet Hair Remover Mini Turbo Nozzle* Allergen Remover Mini Turbo Nozzle* Grand Turbo Nozzle* IT IS IMPORTANT THAT YOU DO NOT: ASSEMBLING YOUR CLEANER Remove all components from the packaging. Connect the hose to the cleaner main body, ensuring it clips and locks into position. To release the hose: simply press the two hose release buttons on the hose end and remove hose. [. . . ] Adjust the power level by turning the On-Off / Variable Power Control Roller to the desired level. Switch off at the end of use turning the On-Off / Variable Power Control Roller. [8] Unplug and gently pull the cord, the cord will begin to automatically retract back into the cleaner. [9] PARKING AND STORAGE To access the pre-motor filter: 1. Remove the Dust Container from the cleaner mainbody. Hold the Dust Container over a bin with one hand, Hold the dust container upside down so that the pre-motor filter faces upwards. Unlatch then unhinge the pre-motor filter frame and remove the pre-motor filter from the frame. Gently tap and wash the filter packs using hand warm water. [22] Remove excess water from the filters with a dry cloth and leave to dry fully before re-using. Reassemble filter packs once fully dry and refit to the cleane. IMPORTANT: Do not use the product without the pre-motor filter pack fitted. IMPORTANT: Always ensure the filter packs are fully dry before use. Unlock the exhaust filter cover by sliding the button towards the rear of the cleaner. Gently tap and wash the filter pack using hand warm water. [22] Remove excess water from the filters with a dry cloth and leave to dry fully before re-using. Reassemble filter packs once fully dry and refit to the cleaner. remember: Do not use hot water or detergents. In the unlikely event of the filters becoming damaged, fit a Genuine Hoover consumable. Do not try and use the product without a filter fitted. The flexible hose and tube can be parked for temporary storage while in use [10] or in the Nanopack storage position when not in use [17]: 1. Retract the telescopic tube to its storage length. Remove the nozzle from the end of the telescopic tube. [. . . ] The Environment: This appliance is marked according to the European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The symbol on the product indicates that this product may not be treated as houshold waste. Instead it shall be handed over to the appliance collection point for recycling of electrical and electronic equipment. [. . . ]