User manual HOOVER UH70086

[. . . ] If you need assistance: Visit our website at hoover. Follow the authorized dealer locator link to find the Hoover® authorized dealer nearest you or call 1-800-944-9200 for an automated referral of Hoover® authorized dealer locations (U. Only) or to speak with a customer service representative; Mon- Fri 8am- 7pm EST. When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. [. . . ] 7 The handle of your cleaner has two positions: upright for storage and when using cleaning tools; operating position for general operation on carpet and floors; hold nozzle with foot (E) and pull handle back. 6 Slide the telescopic handle release down to easily adjust height of ergonomic handle Tools allow for cleaning surfaces above the floor and for reaching hard to clean areas. The vacuum is ready for tool use when handle is in upright position. Crevice Tool may be used in tight spaces, corners and along edges in such places as dresser drawers, upholstered furniture, stairs and baseboards. Use Upholstery Tool to clean upholstered furniture, draperies, mattresses, clothing, and carpeted stairs. Dusting Brush may be used for carved furniture, table tops, books, lamps, lighting fixtures, venetian blinds, baseboards, shutters, and registers. 2 To remove hose for tool use, press the hose release button and pull hose end out. To lock back into place, push hose into hose tube until you hear a click. Press handle wand release button and pull handle up to remove. Press the hose release button on the nozzle and remove the hose from the nozzle. For extended cleaning reach, you may attach the hose to the stair hose*. Allow filter to dry completely before replacing. Dry filter on edge so air circulates on both sides of filter. Filter Made with hepa Media: how to Clean !To reduce the risk of injury from moving parts, unplug vacuum before servicing. Do not use vacuum without dirt cup or filters in place. Return filter and replace dirt cup on vacuum. Filter Made with hepa Media: what to buy When used and maintained properly, your Filter should not need replacement within the warranty period. To reduce the risk of injury from moving parts, unplug vacuum before servicing. 10 To remove hose for tool use, press the hose release button (A) and pull hose end out. Clear away debris or obstructions from hose. Do not use sharp objects to clean out hose as they can cause damage. [. . . ] Any other servicing should be done by an authorized service representative. To reduce risk of personal injury - unplug vacuum before servicing. Power cord not firmly plugged into outlet. Clean rinsable filter and or filter made with HEPA media - Pg. [. . . ]