User manual HOOVER UH70116

[. . . ] Please enter the complete model and Manufacturing Code in the spaces provided. CODE Hint: Attach your sales receipt to this owner's manual. Verification of date of purchase may be required for warranty service of your HOOVER® product. Be sure to register your product online at Hoover. [. . . ] To attach tool or wand to hose, push firmly into place. Actual model may vary from images shown. Never leave the vacuum standing on stairs when not cleaning. When using tools, always turn the brushroll off by stepping on the "Suction Only Mode" pedal (available on select models only) as shown in diagram 2. To avoid personal injury or damage, and to prevent the cleaner from falling, always place cleaner at bottom of stairs on floor. Do not place cleaner on stairs or furniture, as it may result in injury or damage. When using tools, always turn the brushroll off by stepping on the "Suction Only Mode" pedal (available on select models only) as shown in diagram 2. How to clean tools To clean Hose and Powered Hand Tool, wipe with a damp cloth. Other cleaning tools may be washed in warm water with a detergent. Rinse and air dry 24 hours before using. Familiarize yourself with these home maintenance tasks as proper use and care of your vacuum will ensure continued cleaning effectiveness. Clean rinsable filter and/or filter made with HEPA media - reference pg. Any other servicing should be done by an authorized service representative. A Thermal Protector has been designed into your cleaner to protect it from overheating. Turn cleaner OFF and unplug it from the electrical outlet. This blockage may occur at the: nozzle inlet, hose connector, hose, dirt cup inlet, cyclonic filter, Rinsable filter, and HEPA filter. When cleaner is unplugged and motor cools for 30 minutes, the thermal protector will deactivate and cleaning may continue. If the thermal protector continues to activate after following the above steps, your cleaner needs servicing. Actual model may vary from images shown. 2 To maintain optimal performance, empty the dirt cup before the dirt cup reaches the max line (A). To reduce the risk of injury from moving parts, unplug vacuum before servicing. Do not use vacuum without dirt cup or filters in place. [. . . ] Vacuum is difficult to push or won't move forward Powered Hand Tool brushroll won't turn Too much pressure being applied to tool. Follow the service center link to find the service outlet nearest you. Do not send your vacuum to Hoover®, Inc. If you need further assistance: To speak with a customer service representative call 1-800-944-9200; Mon-Fri 8am-7pm EST. [. . . ]