User manual HOOVER WDM130

[. . . ] REMEMBER: - After use, switch the cleaner off and remove the plug from the electricity supply. Always switch off and remove the plug before cleaning the appliance or attempting any maintenance. Please note to release: press in hose connector and pull out (Picture 1) To assemble the extension tubes to the floor nozzle and the handle - Push and twist to lock. Simply turn the clip ring and pull the handle to release the ZOOM-tube. [. . . ] (Picture 9) REMEMBER : Do not position the cleaner above you when cleaning stairs. Release valve lever when ZOOM-tube has fully retracted. connect clip ring to handle and twist & lock shown. (Picture 11) Switch off at end of use - Press the on/off pedal to switch off the cleaner. unplug from socket and press the cord rewind pedal. (Picture 12) Parking and storage - The extension tube can be parked for temporary storage during cleaning or in the storage position when not in use. Power supply - Extract cord and plug in to power supply. Please make sure the cord is fully extended before using the cleaner. (Picture 3) Extension tube length - Adjust the length of the metal tube to suit your height as shown. (Picture 4) Carpet/hard floor selection - Press the pedal on the nozzle to lower the brush head when cleaning hard floors. Check if there is any other blockage in the system: - Use a rod or pole to remove any blockage from the tubes and flexible hose. it may also be possible to remove an obstruction in the zoom tube by lightly squeezing or bending it. Clean the underside of the carpet and hard floor nozzle frequently by using the crevice tool. USER CHECKLIST The following is a simple user checklist before calling your local Hoover Service. Please note that a service charge will be made if the cleaner is examined and found in working order, has not been assembled in accordance with these instructions, or has been misused. GENUINE HOOVER SPARES AND CONSUMABLES Is there a working electricity supply to the cleaner?- Please see section below - 'Removing a blockage from the system' Has the cleaner over-heated?Always replace parts with genuine Hoover spares and consumables. These are available from your local Hoover dealer or direct from Hoover. When ordering parts, please always quote your model number. [. . . ] When ordering parts, please always quote your model number. HOOVER SERVICE Should you require service at any time, please call you local Hoover Service office. SAFETY AND THE ENVIROMENT As the owner of a new Hoover product, we would like to tell you more about the high standards we have set in safety and the environment: - SAFETY Although safety certification of electrical appliances is not required by law in the UK, Hoover believe that independent approval is the best way of demonstrating safety in design and manufacture. The British Electrotechnical Approvals Board (BEAB), the independent UK national authority for the safety of domestic electrical appliances, ensure that European safety standards are met and maintained throughout the production life of an appliance. [. . . ]