User manual HOOVER WH10200

[. . . ] Place the unit on a flat, stable surface with adequate ventilation. The unit has 3 Air Cleaning Power settings, and an LED will indicate which setting is in operation. - Press the "UV/TiO2" button to toggle on/off. [. . . ] Replace the filter with Hoover Part Number: AH60010 and then use a paper clip to press the "Filter As with all bulbs, this will require periodic replacement, depending on frequency of use. To ensure bulb is operational, periodically look at back of product for a blue glow through the grille. Checking in a low light environment or in the dark will aid in seeing the glow. replace the UV Bulb with Hoover part #440001068. To replace the UV bulb: - Switch off the unit, and unplug it from the AC outlet. 2 A) on the top clamp and the larger screw on the bottom clamp. - Gently grasp bulb at the top and pull outward until bulb is free of clamp (2. Place new bulb in position and apply very light pressure to top of bulb to seat. - Do not rest anything on the power cord. - Do not place the Air Purifier where people or pets may trip over or walk on the power cord. - Do not pick the unit up by the power cord. - Inspect the power cord before use to ensure the cord and plug are in a good condition. If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the checklist below. Any other servicing should be done by an authorized service representative. [. . . ] This warranty does not apply to products purchased outside the United States, including its territories and possessions, outside a U. Military Exchange and outside of Canada. This warranty does not cover products purchased from a party that is not an authorized retailer, dealer, or distributor of Hoover® products. [. . . ]