User manual HOOVER WINDTUNNEL CANISTER CLEANER

[. . . ] Review this manual before operating cleaner. The model and serial number are located on the bottom of the cleaner. For your personal records, please enter the COMPLETE model and serial number in the spaces provided and retain this information. It is suggested that you attach your sales receipt to this owner's manual. [. . . ] Special edge groomers are provided on both sides of the nozzle to remove dirt in carpet near baseboards and furniture. Push the (--) button to reduce energy consumption and to clean lightly soiled areas or delicate fabrics. Push the (+) button for maximum cleaning power in heavily soiled areas. If the power nozzle is difficult to push, push the (--) button to reduce the power. Push the tool lid release latch to open (N). Select the tool best suited for the cleaning task from the following descriptions. Firmly push tool into the hand grip or wand. Crevice tool may be used in tight spaces, corners, and along edges in such places as dresser drawers, upholstered furniture, stairs and baseboards. Combination tool may be used for carved furniture, table tops, books, lamps, lighting fixtures, venetian blinds, baseboards, shutters and registers. May also be used for upholstered furniture, draperies, tapestries, mattresses and clothing. Hard floor tool may be used for walls and very irregular hard surface floors such as brick and slate. Powered hand tool may be used for upholstered furniture, carpeted stairs, and hard to reach places. Slide combination tool apart to reveal second tool. To save storage space, stand the cleaner on end and hook wand storage clip on bottom of cleaner. The nozzle must be positioned down as shown. How to clean stairs clean stairs by placing cleaner on end. Use light pressure when cleaning with the powered hand tool as excessive pressure may cause the brushes to stall. Familiarize yourself with these home maintenance tasks as proper use and care of your cleaner will ensure continued cleaning effectiveness. Check the Filter Bag when the Full Bag Indicator Light shows Red. When the Filter Bag is filled with dirt, the cleaner will not operate efficiently. Discard the used Filter Bag and replace with a new one. Discard the used Filter Bag and replace with a new one. [. . . ] Too much pressure being applied to tool. Continue using tool applying light pressure. Make sure power nozzle is disconnected from wand. Remove bottom plate, belt guard and turbine as described in Figs. [. . . ]