User manual HOOVER WMH147

[. . . ] To ensure safety when disposing of an old washing machine disconnect the mains plug from the socket, cut the mains power cable and destroy this together with the plug. To prevent children shutting themselves in the machine break the door hinges or the door lock. This machine is solely for domestic use, i. To wash, rinse and spin dry household textiles and garments. [. . . ] By pressing the Aclarado No Alérgias button you can scroll through the YES (SI) and NO (NO) options. to confirm your selection press the Inicio Diferido button. The screen will then move to the next stage and ask you if you wish to Enable Memory. This is a useful feature if you frequently wash laundry using the same programme. Selecting Enable Memory will tell the machine to remember the last programme/functions used and set them in the memory. This feature works only on the Cottons, Delicates, Synthetics and Woollens programmes. After selecting the programme and the required options (see the Wash Options section of this manual), press the Start Pausa button once to start the wash cycle. The display will indicate that the door is locked and the machine will begin to sense the wash load and ask you to wait. After the appropriate parameters have been programmed by the machine the display will indicate the approximate time until the end of the programme. This calculation is based on a full load and will be adjusted to suit the size and composition of the load as the machine progresses through the wash cycle. The programme may be paused at any time during the wash cycle by holding down the Start Pausa button for about three seconds. The machine stops in the final rinse stage and the option indicators blink. The load is held in the water in the drum, thus reducing creasing and enabling easier ironing. Action required to complete the cycle To select a full spin cycle please turn the dial to the required spin programme (see Programme Guide). press the Planchado Rapido button to continue with the programme. The machine will then pump out the water and the programme will conclude with a short spin. Finally, the programme carries out a brief tumbling action to loosen the items in the load. Press the Planchado Rapido button and the machine will pump out the water and complete the cycle with a short spin. The machine stops in the final rinse stage and the option indicators blink. The load is held in the water in the drum, thus reducing creasing and enabling easier ironing. The machine stops in the final rinse stage and the option indicators blink. The load is held in the water in the drum, thus reducing creasing and enabling easier ironing. [. . . ] Is there clothing or dirt between the door gasket and the door glass?Ensure that the door glass and gasket are kept clean and free of laundry when loading the machine. Have you selected an option that changes the spin profile (Planchado Rapido or change of spin speed using the Centrifugado button)?To reduce noise and vibration and improve the machine's reliability and life, the machine is fitted with an electronic sensor that detects if the load is unbalanced. [. . . ]