User manual HOTPOINT-ARISTON FZ 62

[. . . ] Operating Instructions OVEN Contents IT Italiano, 1 GB GB English, 12 FR Français, 22 Installation, 13-14 Positioning Electrical connections Data plate Overall view Control panel ES Espanol, 32 PT Portuges, 42 Description of the appliance, 15 Start-up and use, 16 Starting the oven How to use the timer Analogue programmer, 17 Setting the time Starting the oven Programming your cooking FZ 61. 1 FZ 61. 1 IX FZ 612. 2 FZ 612. 1 IX FZ 62 C. 1 FZ 62 C. 1 IX FZ 65. 1 FZ 65. 1 IX FZ 65 C. 1 FZ 65 C. 1 IX F 60. 1 F 60. 1 IX FQ 61. 1 FQ 61. 1 IX Cooking modes, 18-19 Cooking modes Practical cooking advice Cooking advice table Precautions and tips, 20 General safety Disposal Respecting and conserving the environment Assistance Maintenance and care, 21 Switching the appliance off Cleaning the appliance Cleaning the oven door Replacing the light bulb Sliding Rack Kit assembly Installation !Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. [. . . ] To use the oven manually, in other words when you do not wish to use the end of cooking timer, turn the COOKING TIMER knob until it reaches the 9 symbol. * Only on certain models 16 Analogue programmer Programming your cooking Programming instant cooking time 12 GB 9 6 3 Setting the time Press the PROGRAMMER knob and turn it anticlockwise to set the correct time. The clock can only be set if the oven is connected to the mains. In case of a power failure, the PROGRAMMER will stop: the correct time will have to be reset. 1. Turn the PROGRAMMER knob anticlockwise until the desired cooking time is displayed. Pull the PROGRAMMER knob and turn it anticlockwise until the knob marker lines up with the current time. A click will indicate the end of the programming phase. Select the desired cooking mode using the SELECTOR knob. The oven comes on immediately and stays on for the entire duration of the set cooking time. When the selected time has elapsed, a buzzer will sound and the oven will turn off. and a time of 1 hour and 15 minutes is programmed. The programme stops automatically at 10:15 a. m. Turn the PROGRAMMER knob anticlockwise until the desired cooking time is displayed. Pull the PROGRAMMER knob and turn it anticlockwise until the knob marker lines up with the desired cooking start time. Select the desired cooking mode using the SELECTOR knob. The oven will come on at the set cooking start time and will stay on for the entire duration of the set cooking time. When the selected time has elapsed, a buzzer will sound and the oven will turn off. and a time of 1 hour and 15 minutes is programmed and the start time is set to 11:00. The programme starts automatically at 11:00 and ends at 12:15. To cancel programming, turn the PROGRAMMER knob anticlockwise until the symbol 9 is displayed. Starting the oven 1. Turn the PROGRAMMER knob anticlockwise until the 9 symbol is displayed. Pull the PROGRAMMER knob and turn it anticlockwise until the knob marker lines up with the current time. A click will indicate the end of the programming phase. [. . . ] Always keep the oven door closed when using the BARBECUE and GRATIN modes: to attain best results and to save energy (approximately 10%). Regularly check the door seals and wipe clean to ensure they are free of debris so that they stick properly to the door and do not allow heat to disperse. Assistance Communicating: appliance model (Mod. ) serial number (S/N) This information is found on the data plate located on the appliance and/or on the packaging. 20 Maintenance and care Switching the appliance off Disconnect your appliance from the electricity supply before carrying out any work on it. Replacing the light bulb To replace the oven light bulb: 1. Remove the glass cover of the lamp-holder. Remove the light bulb and replace it with a similar one: Wattage 25 W, cap E 14. [. . . ]