User manual HOTPOINT-ARISTON HB9589

[. . . ] · See page 39 for the recordable time of "Memory Stick PRO Duo" media. is not fully charged, you can use the partially charged capacity of the battery as is. · If you do not intend to use the camera for a long time, use up the existing charge and store the camera in a cool, dry place. This is to maintain the battery functions. [. . . ] Press [OK]. (Slideshow): Playing back a series of images 1 Select the images you want to start slide show with the multi-selector tilt to v/V/b/B, then press the multi-selector. 3 Select (Slideshow) with the multi-selector tilt to v/V, then press the multi-selector. 4 Select [Start] with v/V, then press the multi-selector to start playback. Using functions for viewing To stop the slideshow Press the multi-selector. · You cannot resume the slideshow from this status. To change the setup Before starting slideshow, you can change the settings using the multi-selector. The default settings are marked with . 41 Viewing menu For details on the operation 1 page 27 Interval 1 sec 3 sec 5 sec 10 sec Sets the slide show interval. Repeat On Off Plays back images in a continuous loop. After all the images have been played back, the slide show ends. (Protect): Preventing accidental erasure Protects recorded images against accidental erasure. The mark is displayed for registered images. (This Image) (Multiple Images) Protects the currently displayed image in single-image mode. You can select and protect multiple images. 1 Select an image then press the multi-selector. Repeat the above steps until there are no more images to be protected. Select an image with a mark to release the mark. Even if you execute this function, the images stored in the internal memory are retained. 1 Select [Initialize] with the multi-selector tilt to v/V, then press the multi-selector or tilt to B. The message "Reset to default settings" appears. 2 Select [OK] with v, then press the multi-selector. The settings are reset to the default setting. To cancel the resetting Select [Cancel] in step 2, then press the multi-selector. · Be sure not to turn the power of the camera off while initializing. 46 Main Settings 2/2 The default settings are marked with . For details on the operation 1 page 44 LUN Settings Allows you to select the settings for the display method of images on the recording media set in a connected equipment, such as a computer, when the camera is connected to a computer or AV equipment with a USB connection. Multi Displays the images both on the memory card and in the internal memory of the camera. Select this when you connect the camera to a computer. Displays only the images on the memory card when a memory card is inserted, and displays the images in the internal memory when a memory card is not inserted. Select this when you connect the camera to equipment other than a computer, and neither the images on the memory card nor the images in the internal memory of the camera are displayed. Single b Note · Be sure to set [LUN Settings] to [Multi], while uploading videos and still images to media services using "PMB Portable". Video Out Sets the video signal output according to the TV color system of the connected video equipment. Different countries and regions use different TV color systems. If you want to view images on a TV screen, check page 53 for the TV color system of the country or region where the camera is used. NTSC PAL Sets the video output signal to NTSC mode (e. g. , for the USA, Japan). Sets the video output signal to PAL mode (e. g. , for Europe, China). Customizing the settings 47 Memory Card Tool For details on the operation 1 page 44 This item appears only when the memory card is inserted in the camera. Format Formats the memory card. [. . . ] · Microsoft, Windows, Windows Vista and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. · Macintosh, Mac OS, iMac, iBook, PowerBook, Power Mac and eMac are trademarks or registered trademarks of Apple Inc. · Intel and Pentium are trademarks or registered trademarks of Intel Corporation. · MultiMediaCard is a trademark of the MultiMediaCard Association. [. . . ]