User manual HOTPOINT-ARISTON HBBL62

[. . . ] · See page 41 for the recordable time of "Memory Stick PRO Duo" media. is not fully charged, you can use the partially charged capacity of the battery as is. · If you do not intend to use the camera for a long time, use up the existing charge and store the camera in a cool, dry place. This is to maintain the battery functions. [. . . ] Press [OK]. (Slideshow): Playing back a series of images 1 Select the images you want to start slide show with the multi-selector tilt to v/V/b/B, then press the multi-selector. 3 Select (Slideshow) with the multi-selector tilt to v/V, then press the multi-selector. 4 Select [Start] with v/V, then press the multi-selector to start playback. Using functions for viewing To stop the slideshow Press the multi-selector. · You cannot resume the slideshow from this status. To change the setup Before starting slideshow, you can change the settings using the multi-selector. The default settings are marked with . 43 Viewing menu For details on the operation 1 page 29 Interval 1 sec 3 sec 5 sec 10 sec Sets the slide show interval. Repeat On Off Plays back images in a continuous loop. After all the images have been played back, the slide show ends. (Protect): Preventing accidental erasure Protects recorded images against accidental erasure. The mark is displayed for registered images. (This Image) (Multiple Images) Protects the currently displayed image in single-image mode. You can select and protect multiple images. 1 Select an image then press the multi-selector. Repeat the above steps until there are no more images to be protected. Select an image with a mark to release the mark. If you want to view images on a TV screen, check page 56 for the TV color system of the country or region where the camera is used. NTSC PAL Sets the video output signal to NTSC mode (e. g. , for the USA, Japan). Sets the video output signal to PAL mode (e. g. , for Europe, China). Customizing the settings 49 Memory Card Tool For details on the operation 1 page 46 This item appears only when the memory card is inserted in the camera. Format Formats the memory card. To ensure stable operation of the memory cards, we recommend that you format the memory card the first time you use it with this camera. However, if you format the memory card, all the data on the memory card will be deleted and you cannot restore that data. So, be sure to store your important data on the computer before formatting the memory card. · Note that formatting irrevocably erases all data on the memory card, including even protected images. 1 Select [Format] with the multi-selector tilt to v/V/b/B, then tilt to B. The message "All data on memory card will be erased" appears. 2 Select [OK] with v, then press the multi-selector. The format is completed. To cancel the formatting Select [Cancel] in step 2, then press the multi-selector. Copy Copies all images in the internal memory to the memory card. 1 Insert the memory card. 2 Select [Copy] with the multi-selector tilt to v/V/b/B, then tilt to B. The message "All data on internal memory will be copied" appears. [. . . ] · Intel and Pentium are trademarks or registered trademarks of Intel Corporation. · 360 Video is a trademark of Sony Corporation. · MultiMediaCard is a trademark of the MultiMediaCard Association. In addition, system and product names used in this manual are, in general, trademarks or registered trademarks of their respective developers or manufacturers. [. . . ]