User manual HOTPOINT-ARISTON LBE 88

[. . . ] 48008071-001. A02 DataTraveler Locker+ ® Page 2 of 22 About This Manual This user manual covers the DataTraveler® Locker+ (referred to simply as DTL+ from this point forward) based on the factory image with no implemented customizations. System Requirements PC Platform • • • • Pentium III Processor or equivalent (or faster) 15MB free disk space USB 2. 0 Two consecutive drive letters after the last physical drive* PC Operating System Support • • • Windows® 7 Windows® Vista SP1, SP2 Windows® XP SP2, SP3 Mac Platform • • 15MB free disk space USB 2. 0 Operating System Support • • Mac OS X 10. 5. x Mac OS X 10. 6. x Recommendations To ensure there is ample power provided to the DTL+ device, insert it directly into a USB port on your notebook or desktop, as seen in Figure 1. 1. Avoid connecting the DTL+ to any peripheral device(s) that may feature a USB port, such as a keyboard or USB-powered hub, as seen in Figure 1. 2. Figure 1. 1 – Recommended Usage Figure 1. 2 – Not Recommended *Note: See ‘Drive Letter Conflict’ on page 22. Document No. 48008071-001. A02 DataTraveler Locker+ ® Page 3 of 22 Setup (Windows Environment) 1. Insert the DTL+ into an available USB port on your notebook or desktop and wait for Windows to detect it. [. . . ] Enter it in the ‘Password’ field, then re-enter it in the ‘Password Confirmation’ field, as seen below in Figure 3. 3. The password you create must meet the following criteria before the initialization process will allow you to continue: 1. Passwords must contain 6 characters or more (up to 16 characters. ) 2. Passwords must contain three (3) of the following criteria options: - UPPER CASE, lower case, numeric, and/or special characters (!, $, etc. ) You may also enter a password hint, but it is not a mandatory field. The hint field can be useful in providing a clue as to what the password is, should the password ever be forgotten. (Note: The hint CANNOT be an exact match to the password. ) Figure 3. 3 – Password Setup Document No. 48008071-001. A02 DataTraveler Locker+ ® Page 6 of 22 4. Enter your contact information into the text boxes provided (see Figure 3. 4) (Note: The information you enter in these fields may NOT contain the password string you created in Step 3. However, these fields are optional and can be left blank, if so desired. ) • The ‘Name’ field may contain up to 32 characters, but cannot contain the exact password. • The ‘Company’ field may contain up to 32 characters, but cannot contain the exact password. • The ‘Details’ field may contain up to 156 characters, but cannot contain the exact password. Figure 3. 4 – Contact Information 5. The password you create must meet the following criteria before the initialization process will allow you to continue: 1. Passwords must contain 6 characters or more (up to 16 characters. ) 2. Passwords must contain three (3) of the following criteria options: - UPPER CASE, lower case, numeric, and/or special characters (!, $, etc. ) You may also enter a password hint, but it is not a mandatory field. The hint field can be useful in providing a clue as to what the password is, should the password ever be forgotten. (Note: The hint CANNOT be an exact match to the password. ) Figure 7. 3 – Password Setup Document No. 48008071-001. A02 DataTraveler Locker+ ® Page 14 of 22 4. Enter your contact information into the text boxes provided (see Figure 7. 4) (Note: The information you enter in these fields may NOT contain the password string you created in Step 3. However, these fields are optional and can be left blank, if so desired. ) • The ‘Name’ field may contain up to 32 characters, but cannot contain the exact password. • The ‘Company’ field may contain up to 32 characters, but cannot contain the exact password. • The ‘Details’ field may contain up to 156 characters, but cannot contain the exact password. Figure 7. 4 – Contact Information 5. Click ‘Finish’ to complete the device initialization process. Document No. [. . . ] 48008071-001. A02 DataTraveler Locker+ Page 20 of 22 Forgot Password If you forget your password, you can click on the ‘Forgot Password’ link that appears in the device login window when DTLplus_Launcher is executed (see Figure 10. 3. ) This option will allow you to create a new password, but in order to protect the privacy of your data, the DTL+ will be formatted. This means that all of your data will be erased in the process. * When you do click on ‘Forgot Password’, a message box (Figure 10. 4) will appear and ask if you want to enter a new password prior to executing the format. At this point, you can either 1) click ‘OK’ to confirm or 2) click ‘Cancel’ to return to the login window. If you opt to continue, you will be prompted to create a new complex password and a new hint. [. . . ]