User manual HOTPOINT 7HKRM 641 D X RU/HA

[. . . ] If you have any questions about this product, you may call: Sony Customer Information Center 1-800-942-HOTPOINT(7669). The number below is for the FCC related matters only. Telephone Number : 858-942-2230 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ] This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. ⭠Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ⭠Consult the dealer or an experienced radio/TV technician for help. The shielded interface cable and connectors must be used in order to comply with the limits for digital device pursuant to subpart B of Part 15 of FCC Rules. This Class B digital apparatus complies with Canadian ICES-003. This product conforms to the following European Directives, 2004/108/EC (EMC Directive) This product complies with EN55022 Class B and EN55024 for use in the following areas; residential, commercial, and light-industrial. (The icon and messages that appear may vary depending on the version of the OS. ) When running Windows Vista, you can also select "Safely Remove Hardware" by rightclicking the Micro Vault drive icon in Explorer or My Computer. When removing the Micro Vault while Virtual Expander is running, be sure to end the program first by right-clicking the Virtual Expander icon in the task tray and selecting "End" from the menu that appears. For more details on its use, see the README file stored in the Micro Vault. Files that have already been compressed and files of 2 KB or less are saved unchanged, without being compressed. ⷠIf the software becomes unstable during use, visit the following URL to download the latest version. Only products with Micro Vault Virtual Expander installed at the time of purchase can download from this Web site. When formatting the device, use the format software which you can download from the website. To avoid any changes of the specifications, do not format the device in any other way. ⷠThe Micro Vault may not function correctly if it is connected to the computer when the computer is started up, restarted, or restored from sleep mode. Always disconnect the Micro Vault from the computer before performing any of these operations. [. . . ] However, a hook-shaped metal object (such as a key holder) should not be attached to this hole, because it may cause damage to the Micro Vault. ⷠDo not place the unit in locations that are: ­ extremely hot or cold ­ dusty or dirty ­ very humid ­ vibrating ­ exposed to corrosive gases ­ exposed to direct sunlight · Cleaning Clean the unit with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzene, which may damage the finish. It is strongly recommended that you periodically back up the data written on the unit. [. . . ]