User manual HOTPOINT 7HPZ 640 T GH RU/HA

[. . . ] When using a built-in camera flash or a flash supplied with the camera, remove the lens hood to avoid blocking the flash light. You can attach a filter or front lens cap to the lens hood as well. [. . . ] After the camera focuses in auto focus, you can make a fine adjustment manually. Macro photography Precautions on using a commercially available exposure meter or manual flash shooting function When shooting close to a subject with the E 30mm F3. 5 Macro , the brightness of the lens is reduced. When shooting in automatic exposure mode or metered manual mode (for example, the camera's AUTO mode), the exposure is adjusted automatically. When using a commercially available exposure meter or shooting with the manual flash function available on some external flash units, set the exposure higher than the indicated value. When two or more subjects at different distances are overlapping in the AF area, it may be hard for the camera to focus automatically. Depending on the lens mechanism, the focal length may change with any change in shooting distance. When using the lens, the corners of the screen become darker than the center. To reduce this phenomena (called vignetting), close the aperture by 1 to 2 stops. Included items Lens (1), Front lens cap (1), Rear lens cap (1), Lens hood* (1), Set of printed documentation * The lens hood is attached to the lens when the lens is shipped from the factory. Design and specifications are subject to change without notice. Remove the rear and front lens caps and the camera body cap. [. . . ] Remove the rear and front lens caps and the camera body cap. You can attach/detach the front lens cap in two ways, (1) and (2). [. . . ]