User manual HOTPOINT 7OF 99 C.1 IX RU/HA

[. . . ] Operating Instructions OVEN Contents GB English, 1 GB Installation, 2-3 RS Русский, 13 Positioning Electrical connection Technical data Description of the appliance, 4 Overall view Control panel Display Start-up and use, 5 Setting the clock Setting the timer Starting the oven Cooking modes, 6-8 7OF 99 C. 1 IX RU/HA Cooking modes Programming cooking Practical cooking advice Cooking advice table Precautions and tips, 9 General safety Disposal Respecting and conserving the environment Care and maintenance, 10-11 Switching the appliance off Cleaning the appliance Cleaning the oven door Replacing the light bulb Assembling the sliding rack kit Assistance, 12 Installation !Before operating your new appliance please read this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance. [. . . ] Always cook in this mode with the oven door closed. PIZZA OVEN mode This combination heats the oven rapidly by producing a considerable amount of heat, particularly from the element at the bottom. If you use more than one rack at a time, switch the position of the dishes halfway through the cooking process. BAKING mode This mode is ideal for baking temperature sensitive foods (such as cakes, which need to rise) and for the preparation of “bitesize pastries” on 3 shelves simultaneously. FAST COOKING mode Preheating is not necessary for this cooking mode. This mode is particularly suitable for cooking prepacked food quickly (frozen or pre-cooked). The best results are achieved using one cooking rack only. PROVING mode The oven reaches and maintains a temperature of 40°C irrespective of the position of the THERMOSTAT knob. This mode is ideal for leavening dough made with yeast. Place the rotisserie support in position 3 and insert the spit in the hole provided on the back panel of the oven. Start the rotisserie using the SELECTOR knob to select mode or . When the or mode is activated, the spit will stop if the door is opened. A cooking mode must be selected before programming can take place. Programming the cooking duration button several times until the 1. Press the icon and the three digits on the DISPLAY begin to flash. Turn the TIMER KNOB towards “+” and “-” to adjust the duration. When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds. And a time of 1 hour and 15 minutes is programmed. Setting the end time for a cooking mode !A cooking duration must be set before the end cooking time can be scheduled. Follow steps 1 to 3 to set the duration as detailed above. Next, press the the two digits on the DISPLAY begin to flash. [. . . ] Never use steam cleaners or pressure cleaners on the appliance. Replacing the light bulb To replace the oven light bulb: Cleaning the oven door Clean the glass part of the oven door using a sponge and a non-abrasive cleaning product, then dry thoroughly with a soft cloth. Do not use rough abrasive material or sharp metal scrapers as these could scratch the surface and cause the glass to crack. To clean more thoroughly, you can remove the oven door. [. . . ]