User manual HOTPOINT AQ83D 29 EU/B

[. . . ] Instructions for installation and use Contents EN English, 1 WASHING MACHINE EN Installation, 2-3 PL Polski, 13 RO Română, 25 Unpacking and levelling Connecting the electricity and water supplies Technical data Description of the machine, 4-5 Touch control panel UK Українська, 37 LV , 49 Running a wash cycle, 6 Wash cycles and options, 7 Table of wash cycles Wash options Detergents and laundry, 8 Detergent Preparing the laundry Washing recommendations AQUALTIS AQ83D 29 Precautions and advice, 9 General safety Load balancing system Disposal Opening the porthole door manually Care and maintenance, 10 Cutting off the water and electricity supplies Cleaning the machine Cleaning the detergent dispenser drawer Caring for your appliance drum Cleaning the pump Checking the water inlet hose Trouble shooting, 11 Assistance, 12 1 Installation EN !This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it. Read these instructions carefully: they contain vital information relating to the safe installation and operation of the appliance. [. . . ] This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 40°C. The actual washing temperature may differ from the indicated value. 3) At 60 °C the “Prewash” function cannot be selected. For all Test Institutes: 2) Long wash cycle for cottons: set wash cycle 4) Long wash cycle for synthetics: set wash cycle with a temperature of 40°C. Wash options This option offers a highperformance wash due to the 3 greater quantity of water used in the initial phase of the cycle, and due to the increased wash cycle 1 duration, is particularly useful for the removal of stubborn stains. 2 It can be used with or without bleach. If you desire bleaching, insert the extra tray compartment (3) into compartment 1. When pouring in the bleach, be careful not to exceed the “max” level marked on the central pivot (see figure). To bleach laundry without carrying out a full wash cycle, pour the bleach into the extra compartment 3, select the “Rinse” cycle and activate the “Super Wash” option . It cannot be used in conjunction with , , , , , Super Wash Extra rinse By selecting this option, the efficiency of the rinse is increased and optimal residual detergent removal is guaranteed. It is particularly useful for skin which is sensitive to detergents. We recommend this option is used with a full load of washing, or when a large amount of detergent is required. It cannot be used in conjunction with , , , , . Easy Iron By selecting this option, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end of the cycle the washing machine drum will rotate slowly; the “Easy Iron” and START/PAUSE indicator lights will flash. To end the cycle press the START/PAUSE button or the “Easy Iron” button. It cannot be used in conjunction with , , , , , . Prewash If this function is selected, the pre-wash cycle will run; this is useful for removing stubborn stains. : put the detergent in the relevant compartment. It cannot be used in conjunction with , , , , , , , . , , , , (60°) , , . 7 Detergents and laundry EN Detergent The type and quantity of detergent required depend on the type of fabric you are washing (cotton, wool, silk, etc. [. . . ] Special anti-draining valves are available in shops and help to prevent this inconvenience. € The wall drainage system is not fitted with a breather pipe. € The wash cycle does not include draining: Some wash cycles require the drain phase to be started manually (see “Wash cycles and options”). € The option is enabled: to complete the wash cycle, press the START/ PAUSE button (“Wash cycles and options”). [. . . ]