User manual HOTPOINT AQ93L 29 EU

[. . . ] Locate a free PCI slot (a short white slot). Unscrew and remove the meta cover plate which covers the back of the empty slot. Plug the WinTV-HVR board into the PCI slot, and screw the WinTVHVR metal cover plate to the PC. When it is completely booted, the Add New Hardware Wizard will appear. [. . . ] audio: Your audio settings are configured here. Colour: Adjust the colour of you TV picture here (analogue TV). Skip back 10 sec Skip back 10 sec Skip to end File menu (save / open) Record Pause Stop Play Fast forward Functions: When recording TV the record button will depressed A time counter will be shown indicating the lenght of time of the recording If you click Stop the time counter will revert back to 00:00:00 When you click the Full screen TV button, TV will appear full screen on your PC monitor. When finished watching TV full screen, click your right mouse button in the TV window. If you see video with a black box around it, click the Pref button then click TV mode tab. Sound up Sound down Plus (+) Minus (-) Ctrl+T Ctrl+P Ctrl+F Clicking the Stop button will stop the video you are recording or playing back. When playing a video, you can rewind, fast forward, replay 10 sec or skip forward 10 sec using the buttons on the control bar. The Pause buffer is space on your hard disk where video is stored during the Pause mode. The maximum amount of time which your TV program can be delayed is dependent upon how much storage space you have set for the Pause buffer. Clicking the Slow Motion button while playing video will play in Slow Motion. Clicking the Slow Motion button again, will continue playing normally. Clicking the Slow Motion button during playback will cause the video to play in slow motion. Clicking the Slow Motion button again will return the video to normal playback speed. To add the S-Video or Composite channel highlight the entry and then select the Video Format from the drop down list. In the File menu you can: Rename your recorded video file: To rename a video file, find the file you would like to rename, highlight it with your mouse, and click and hold the right mouse button. Go down to Rename and then you can type in a new name. Remember: you must keep the MPG extension on the file. Play a video file previously recorded: Find the file you would like to play, highlight it with your mouse (one click of the mouse button) and click Open. Delete recorded video files which you no longer want: Click your right mouse button on the video file once, go down the menu and click Delete. The items that need to be set for each event are: Time to Begin Program: set to the desired start time. The default time is about 3 minutes from the current time. Click on the hour to set the hour, the minute to set the minute and the second (if you feel this is necessary) to set the second to start the program. [. . . ] VTPlus allows you to view multiple teletext pages, save or print teletext pages and create Dynamic Data Links so that teletext data can be used in other applications. The WinTV application does not have to be active while the VTPlus teletext application is running. Please ensure that you have already scanned in your TV channels before starting VTPlus. If you click and hold the right hand mouse button on the Radio window then a menu will appear. [. . . ]