User manual HOTPOINT AR6L 85 HK

[. . . ] Instructions for use WASHING MACHINE Contents GB English, 1 GB Installation, 2-3-4-5 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Care and maintenance, 6 Cutting off the water or electricity supply Cleaning the washing machine Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Precautions and tips, 7 General safety Disposal AR6L 85 Description of the washing machine and starting a wash cycle, 8-9 Control panel Indicator lights Starting a wash cycle Wash cycles, 10 Table of wash cycles Personalisation, 11 Setting the temperature Setting the spin speed Functions Detergents and laundry, 12 Detergent dispenser drawer Bleach cycle Preparing the laundry Garments requiring special care Load balancing system Troubleshooting, 13 Service, 14 1 Installation GB !This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/ herself with its operation and features. Read these instructions carefully: they contain vital information relating to the safe installation and operation of the appliance. Levelling the machine correctly will provide it with stability, help to avoid vibrations and excessive noise and prevent it from shifting while it is operating. [. . . ] Turn the washing machine on by pressing the ON/OFF button. All the indicator lights will turn on for a few seconds, then only the indicator lights relative to the selected programme settings will remain lit and the START/PAUSE indicator light will flash. Set the WASH CYCLE knob to the desired programme. Set the washing temperature (see “Personalisation”). Set the spin speed (see “Personalisation”). Measure out the detergent and washing additives (see “Detergents and laundry”). Start the wash cycle by pressing the START/PAUSE button and the corresponding indicator light will remain lit in a fixed manner, in green. To cancel the set wash cycle, pause the machine by pressing the START/PAUSE button and select a new cycle. At the end of the wash cycle the indicator light will switch on. The DOOR LOCKED indicator light will switch off, indicating that the door may be opened (wait approximately 3 minutes). Take out your laundry and leave the appliance door ajar to make sure the drum dries completely. Switch the washing machine off by pressing the ON/OFF button. 9 Wash cycles GB Table of wash cycles Wash cycles Detergents Prewash Wash Description of the wash cycle Fabric softener Bleach Max. load (kg) Cycle duration 1 2 3 4 5 5 6 7 8 9 10 11 12 13 A B C Cotton + Prewash: extremely soiled whites. Cotton Standard 60° (1): heavily soiled whites and resistant colours. Cotton Standard 40°: lightly soiled resistant and delicate colours. Cotton Standard 20°: lightly soiled resistant and delicate colours. Synthetics: heavily soiled resistant colours. Synthetics: lightly soiled resistant colours. Daily 30': to refresh lightly soiled garments quickly (not suitable for wool, silk and clothes which require washing by hand). Mix 15': to refresh lightly soiled garments quickly (not suitable for wool, silk and clothes which require washing by hand). Night Cycle: lightly soiled delicate colours. Baby Cycle: heavily soiled delicate colours. [. . . ] • There is no water supply in the house. • The START/PAUSE button has not been pressed. • The drain hose is not fitted at a height between 65 and 100 cm from the floor (see “Installation”). • The free end of the hose is under water (see “Installation”). [. . . ]