User manual HOTPOINT BD 291

[. . . ] 1-3 Place a checkmark in the Enable box next to FTP Client. If a checkmark already appears in the Enable box next to FTP Client skip the remaining steps in this pamphlet and continue to Scan Using FTP Server Part 2 of 3. [. . . ] 1-5 The "Settings have been changed. " confirmation screen appears. 1-4 Enter the Administrator Name and Password. (See Machine Administrator User Guide for default password. ) Note: This screen might not appear if the Administrator Name and Password have already been entered. The WorkCentre M24 will take approximately 5 minutes to reboot. Quick Start Guide Scan Using FTP Server Part 1 of 3 Fig. 1-7 If the message "Your request was successfully processed. " is not displayed, repeat the steps in this pamphlet. Continue with Scan Using FTP Server Part 3 of 3. Fig. 2-8 Enter FTP Server User Name and Password then click Apply New Settings. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including FAX machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. To enter the telephone number identifying the machine and the header text information (business name) please refer to "Entering Local Terminal Information" pamphlet Part 2 of 2. To enter date and time please refer to "Entering Local Terminal Information" pamphlet Part 1 of 2. WorkCentre M24 Scan Using FTP Server - 4 of 6 Fig. 3-7 The document is being scanned. Fig. 3-1 Place document(s) on the Document Feeder or Document Glass. Fig. [. . . ] 3-1 Place document(s) on the Document Feeder or Document Glass. Fig. 3-8 The document is being transferred. Fig. [. . . ]