User manual HOTPOINT CE6IFA

[. . . ] 16 Operating Instructions COOKER AND OVEN GB IT Italiano, 1 GB English, 16 FR Français, 33 Contents Installation, 18-19 Positioning and levelling Electrical connection Table of characteristics NL Nederlands, 49 Description of the appliance, 20-21 Overall view Control panel Display Control panel of cooking zone Start-up and use, 22-25 CE6IFA F/HA CE6IFA X F/HA Using the hob Setting the clock Setting the timer Using the oven Manual cooking modes Automatic cooking modes Programming cooking Practical cooking advice Oven cooking advice table Start-up and use of cooknig zone, 26-28 Switching on the hob Switching on the cooking zones Booster function Switching off the cooking zones Programming the cooking time Control panel lock Switching off the hob Practical advice on using the appliance Safety devices Technical description of cooking zones Precautions and tips, 29 General safety Disposal Respecting and conserving the environment Care and maintenance, 30-31 Switching the appliance off Cleaning the appliance Replacing the oven light bulb Automatic cleaning using the FAST CLEAN function Assistance, 32 Installation GB  Before operating your new appliance please read this instruction booklet carefully. It contains important information concerning the safe installation and operation of the appliance.  Please keep these operating instructions for future reference. Make sure that the instructions are kept with the appliance if it is sold, given away or moved. [. . . ] Before using the appliance, we recommend you remove these with a special nonabrasive cleaning product. During the first few hours of use there may be a smell of rubber which will disappear very quickly.  A few seconds after the hob is connected to the electricity supply, a buzzer will sound. Switching off the cooking zones • Press the “-”button: the power of the cooking zone will progressively decrease until it is switched off. • Alternatively, the “-” and “+” buttons may be pressed simultaneously. This immediately returns the power setting to 0 and the cooking zone switches off. Programming the cooking duration*  All the cooking zones may be programmed for a length of time between 1 and 99 minutes. Switching on the hob To switch the hob on, press and hold the for about a second. Button Switching on the cooking zones Each cooking zone is controlled by a device consisting of two buttons (- and +). • Press the “+” button to activate the hotplate, then set the power to the level required using the “-” and “+” buttons. • To set the power to maximum, hold down the “-” button briefly. Select the cooking zone with the corresponding button. Set the cooking time using the “-” and “+” buttons. Confirm the settings by pressing the button. The timer begins counting down immediately. A buzzer sounds for about 1 minute and the cooking zone switches off when the set programme has finished. Repeat the above procedure for each hotplate you wish to programme. Booster function* The booster function for the rear cooking zones may be used to shorten heating-up times. This function boosts the power of the relevant zone to 3000W. Until the booster of one of the rear zones is activated, the front zones have a maximum power of 600 W (e. If the left rear hotplate booster is activated, the power of the left front hotplate decreases). Booster Control panel lock When the hob is switched on, it is possible to lock the oven controls to avoid accidental changes to the settings (by children, during cleaning, etc. [. . . ] Safety devices • The icon on the display, when lit, indicates that the oven door was automatically locked as soon as the temperature reached a high value. • The icon indicates that the cleaning cycle may be cancelled at any time by pressing the button. If a malfunction occurs , the heating elements will be switched off. • Once the oven door has been locked, you cannot change the duration and cycle end time settings. [. . . ]