User manual HOTPOINT CE6IFA.1 X F/HA

[. . . ] 19 Operating Instructions COOKER AND OVEN GB IT Italiano, 1 GB English, 20 FR Français, 38 Contents Installation, 21-22 Positioning and levelling Electrical connection Table of characteristics NL Nederlands, 57 Description of the appliance, 23-24 Overall view Control panel Display Control panel of cooking zone Start-up and use, 25-28 CE6IFA. 1 X F/HA Using the hob Setting the clock Setting the timer Using the oven Manual cooking modes Automatic cooking modes Programming cooking Practical cooking advice Oven cooking advice table Start-up and use of cooknig zone, 29-32 Switching on the hob Switching on the cooking zones Booster function Switching off the cooking zones Programming the cooking duration Timer Control panel lock Switching off the hob “Demo” mode Practical advice on using the appliance Safety devices Technical description of cooking zones Practical cooking advice Precautions and tips, 33-34 General safety Disposal Respecting and conserving the environment Care and maintenance, 35-36 Switching the appliance off Cleaning the appliance Replacing the oven light bulb Automatic cleaning using the FAST CLEAN function Assistance, 37 Installation  Before operating your new appliance please read this instruction booklet carefully. It contains important information concerning the safe installation and operation of the appliance.  Please keep these operating instructions for future reference. [. . . ] The indicator light directly above the button will illuminate. This function boosts the power to 2000 W or 3000 W, depending on the size of the relevant cooking zone. The booster stops automatically after 4 minutes. While the booster for one of the cooking zones is active, the corresponding front or rear cooking zone will operate at a reduced power level (e. If the booster for the rear left-hand hotplate has been activated, the power level of the front left-hand hotplate will be reduced). For further information, please refer to the Technical description of the models. At step 2, press the duration decreases progressively until it reaches 0 and switches off. The programme resets and the display exits programming mode. - button: the • Press and hold the simultaneously for 6 seconds. When the 6 seconds have elapsed, the ON/OFF and CONTROLS LOCKED indicator lights will flash for one second. Release the press the button; + and buttons Timer The hob must be switched on. The timer can be used to set a duration up to 99 minutes. Press the programming button until the timer indicator light is illuminated. Set the desired duration using the buttons. Confirm by pressing the + and buttons and • The display will show the text DE and MO and the hob will be switched off. • When the hob is switched on again it will be set to the “demo” mode. To exit this mode, follow the procedure described above. The display will show the text DE and OF and the hob will be switched off. When it is next switched on, the hob will function normally. The timer begins counting down immediately. When the time has elapsed, a buzzer will sound (for one minute). Practical advice on using the appliance  Use cookware made from materials which are compatible with the induction principle (ferromagnetic material). [. . . ] Safety devices • The icon on the display, when lit, indicates that the oven door was automatically locked as soon as the temperature reached a high value. • The icon indicates that the cleaning cycle may be cancelled at any time by pressing the button. If a malfunction occurs , the heating elements will be switched off. • Once the oven door has been locked, you cannot change the duration and cycle end time settings. [. . . ]