User manual HOTPOINT CI 6I FA

[. . . ] 20 Operating Instructions COOKER AND OVEN GB RS ÐÓÑÑÊÈÉ, 1 GB English, 21 FR Français, 41 Contents Installation, 22-23 Positioning and levelling Electrical connection Table of characteristics Description of the appliance, 24-25 Overall view Control panel Display Hob control panel Start-up and use, 26-30 Setting the clock Setting the timer Using the oven Manual cooking modes Automatic cooking modes Programming cooking Practical cooking advice Oven cooking advice table CI 6I FA R/HA Start-up and use, 31-35 Switching on the hob Switching on the cooking zones Booster function Switching off the cooking zones Programming the cooking duration Timer Control panel lock Switching off the hob “Demo” mode Practical advice on using the appliance Safety devices Technical description of the models Practical cooking advice Precautions and tips, 36-37 General safety Disposal Respecting and conserving the environment Care and maintenance, 38-39 Switching the appliance off Cleaning the appliance Replacing the oven light bulb Cleaning the glass ceramic hob Automatic cleaning using the PYROLYTIC cycle Assistance, 40 Installation GB  Please keep this instruction booklet in a safe place for future reference. Make sure the booklet remains with the appliance if it is sold, given away or moved.  Please read this manual carefully: it contains important information on installation , operation and safety.  The appliance must be installed by a qualified professional in accordance with the instructions provided. [. . . ] This function boosts the power to 2000 W or 3000 W, depending on the size of the relevant cooking zone. The booster stops automatically after 4 minutes. While the booster for one of the cooking zones is active, the corresponding front or rear cooking zone will operate at a reduced power level (e. If the booster for the rear left-hand hotplate has been activated, the power level of the front left-hand hotplate will be reduced). For further information, please refer to the Technical description of the models. Switching off the cooking zones corresponding selector button • Press the and: To switch off a cooking zone, select it using the will progressively decrease until it is switched off. - button: the power of the cooking zone Programming the cooking duration  All the cooking zones may be programmed simultaneously, for a duration between 1 and 99 minutes. Select the cooking zone using the corresponding selector button. Period of time, the display scrolls quickly though the power levels and timer minutes. Set the cooking duration using the buttons. When the time has elapsed, a buzzer will sound (for one minute). The timer begins counting down immediately. Repeat the above procedure for each hotplate you wish to programme. Using multiple programmes and the display If one or more hotplates are programmed, the display will show the data for the hotplate with the least time remaining, and the light corresponding to the position of the hotplate will flash. The lights corresponding to the other hotplates programmed will be switched on. To display the time remaining for the other programmed hotplates, press the button repeatedly. The times remaining for each hotplate will be shown in a clockwise order, beginning with the front left hotplate. Use the button repeatedly until the duration buttons to set the new duration. Control panel lock When the hob is switched on, it is possible to lock the oven controls in order to avoid accidental changes being made to the settings (by children, during cleaning, etc. Press the button to lock the control panel: the indicator light above the button will switch on. To stop cooking), you must switch off this function. Press the button for a few moments, the indicator light will switch off and the lock function will be removed. [. . . ] Intensive (INT): turn the knob towards “+”. Safety devices icon on the display, when lit, indicates • The that the oven door was automatically locked as soon as the temperature reached a high value. • The icon indicates that the cleaning cycle GB may be cancelled at any time by pressing the button. If a malfunction occurs , the heating elements will be switched off. [. . . ]