User manual HOTPOINT CP 759 FT

[. . . ] We recommend you read though this booklet for the best performance and to extend the life of your appliance. This appliance has been designed for private, nonprofessional use in normal dwellings. Read the recommendations in this instruction booklet carefully, as they give important advice regarding safe installation, use and maintenance. Keep this booklet in a safe place for further reference when required. [. . . ] Setting the timer The timer only works when the oven is switched off (mode selector set to " / 0"). Press key briefly and set the time using keys "+" and/or "-". As soon as you release the keys, the selected duration is memorised and can still be modified for 3 seconds, indicator light comes on and the countdown begins. When the end of the time set is reached, an acoustic signal sounds for 1 minute; to turn it off, just press any of the keys; indicator light comes off. The timer operation is independent from that of the oven. Acoustic signal volume You can adjust the volume of the acoustic signal by pressing button "-" (when the signal sounds) until you attain the required volume. Cooking without the programmer When the oven is switched off (mode selector set to 0), all the keys (except for "-" to adjust the volume of the acoustic signal) are disabled. Each cooking mode has a pre-set cooking time, which you can view by pressing . You can modify the and cooking time to suit your recipe. To do so, press set the desired cooking time using keys "+" and "-". The display indicates a recommended temperature, which is independent from that indicated on the temperature selector: you can change it by turning the temperature selector knob. For the "grill" mode, the display indicates a power level between 1 and 5, with 5 being the highest setting. Your oven is now ready to start cooking: press the key. The oven begins the pre-heating phase, during which symbol blinks. It stops blinking when pre-heating is done (after approximately 10 minutes). If you fail to press the cooking start key one minute after having selected a mode, the word "OFF" comes up on the display and the keys are disabled. In this case, set the mode selector back to "0" and proceed with the various adjustments. WARNING Your appliance is fitted with a diagnosis system which detects any malfunctions and displays "FnFm" on the programmer (n and m are numbers). In this case, please contact your nearest after-sales service centre for assistance. 7 THE OVEN: PROGRAMMED COOKING Programmed cooking with immediate start Cooking starts immediately and comes to an automatic stop when the end cooking time is reached. € a recommended cooking time is associated with each cooking mode. You may change the recommended cooking time by pressing and keys "+" and/or "-" (the cooking time must include approximately 10 minutes for the oven to pre-heat). [. . . ] The supply cable must be in such a position that no part of it can reach a temperature of 50°C above room temperature. Before connecting to the power supply, make sure that: • The electrical safety of this appliance can only be guaranteed if the cooker is correctly and efficiently earthed, in compliance with regulations on electrical safety. Always ensure that the earthing is efficient; if you have any doubts call in a qualified technician to check the system. The manufacturer denies all responsibility for damage resulting from a system which has not been earthed. [. . . ]