User manual HOTPOINT CP98SP6FHAX

[. . . ] Warnings WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. [. . . ] How to Reset the Digital Clock After the appliance has been connected to the power source or following a power outage, the clock display will begin to blink and read: 0:00 • Press the buttons at the same time. Then use (within 4 seconds) the and buttons to set the exact time. Use the button to move the time forwards. Use the button to move the time backwards. The time can also be changed in the following two ways: 1. Press the button, and then use the to reset the time. And buttons At the end of the cooking time, an acoustic signal will sound. Press any button it turn it off (except the and buttons). Immediate Start Time with Preset Cooking Length When only the length of the cooking time is set (points 1 and 2 of the paragraph entitled, “Delayed Start Time with Preset Cooking Length”), the cooking session starts immediately. Cancelling a Preset Cooking Time Press the button, and use the button to set the time to: GB Manual Operation Mode for the Oven After the time has been set, the programmer is automatically set to manual mode. Note: Press the button to return the oven to manual mode after every “Automatic” cooking session. Delayed Start Time with Preset Cooking Length The length and the end cooking times must be set. Let us suppose that the display shows 10:00. Turn the oven control knob to the cooking setting and temperature desired (example: convection oven at 200°C). Press the and the use (within 4 seconds) the and buttons to set the length of the cooking time. Let us suppose that 30 minutes was set for the length of the cooking time. In this case, the display will show: Then press the manual cooking mode button . Release the button, and within 4 seconds, the current time will reappear with the symbol and “auto. Press the button, and then use the and buttons to set the end cooking time. Let us suppose that it is 13:00 Timer Feature The timer can be used to count down from a given length of time. This feature does not control when the oven comes on or turns off, but, rather, it only emits an acoustic signal when the preset time has run out. Press the button, and the display will read: 4. [. . . ] € Do not remove any dry caked-on grease using sharp objects, as these could etch the self-cleaning coating. € If the self-cleaning surfaces inside the oven are damaged or worn, due to incorrect or poor maintenance or after many years of use, you can request a kit of self-cleaning panels to line the inside of the oven. to order these , just contact an authorised Service Centre. Oven exterior: • Only clean the appliance when the oven is cold. [. . . ]