User manual HOTPOINT E2BLH 19213 F

[. . . ] Select the type of speaker setup that you are using and click Next. Locate a free PCI slot (a short white slot). Unscrew and remove the metal cover plate which covers the back of the empty slot. Plug the WinTV board into the PCI slot, and screw the WinTV metal cover plate to the PC. [. . . ] you can also connect sources via the composite and S-Video inputs and listen to FM Radio as well. You can now connect the leads provided to the WinTV-HVR-4000 in the following order. FM FM Radio-Antenna TV TV-Antenna SAT SAT-Cable from the LNB of your satellite dish S-VIDEO IN S-Video-Input * LINE IN Stereo-Audio-Input, from the output of your source IR Input for the Infra-red-Sensor You will now need to check that the drivers are installed correctly. If any of them have a yellow exclamation mark, follow this procedure: 1. Once the black screen has closed down, re-start the computer and continue from page 3 above or contact our technical support department. Ote: for using a RCA Yellow Phono composite input you must use the supplied S-Video to composite adapter. With the WinTV-NOVA-HD-S2 you can watch and record DVB-Satellite and DVB-S2 HD channels. You can now connect the leads provided to the WinTV-NOVA-HD-S2 in the following order. SAT SAT-Cable from the LNB of your satellite dish IR Input for the Infra-red-Sensor You need to ensure that you have connected the cables correctly before performing a channel scan. The DVB-T EPG allows you to view now and next channel program information, refer to the online help for more information. Select the location where you want to save the recorded files and click Next. Europe), where you can find the satellite information that will be used for the channel scan, for example: BBC HD is on Europe / Astra 28. You can search your computer for available music files that will be added to a play list by selecting search now, click Next to continue. The WinTV boards have been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna. increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. consult the dealer or an experienced radio/TV technician for help. FCC ID: H90WINTV CAUTION: Changes or modifications not expressly approved by the party responsible for compliance to the FCC Rules could void the user's authority to operate the equipment. [. . . ] FCC ID: H90WINTV CAUTION: Changes or modifications not expressly approved by the party responsible for compliance to the FCC Rules could void the user's authority to operate the equipment. The DVB-S EPG allows you to view now and next channel program information, refer to the online help for more information. The Setup Wizard is now finished, complete the product registration and click Next to terminate. You can use it for the playing of music, video, DVD's and TV shows. [. . . ]