User manual HOTPOINT E2BYH 19223 F O3

[. . . ] Once the installation is complete the WinTV Icon will appear on the desktop. TV Mode Channel up Volume Channel down Always on Top Pref: Configuration Mute Setup Menu CFG Configure Snapshot Snapshot viewer window: Double click on each thumbnail to see image full size. click and hold your right mouse button to see image options. Snapshot Still capture Channel surf Last channel Click your right mouse button in the TV window to remove toolbars. [. . . ] For extended replay times, you might find it more convenient to grab the Video Position indicator control bar and move it to the left. Once you let the control bar go, audio/video starts to play (it might take a few seconds for the WinTV application to start playing). You might have to move the Video Position indicator to the left and right to find the desired spot to start replaying audio/video. While Replaying, your audio/video program continues to be recorded in the Replay Buffer. Therefore, if you have clicked the Replay button 3 times (so that you are replaying the audio/video seen 30 seconds ago), the video you see in the WinTV window will be 30 seconds behind the live program. Play forward slow Here is the main control bar for TV channels, and duplicate controls for other functions: Suite-Manager: Configure the TV tuner (scanning, naming, channel pre set, etc. Functions: When recording TV, the record button will depressed A time counter will be shown indicating the lenght of time of the recording If you click Stop the time counter will revert back to 00:00:00 The time is specified in a Hour:Minute:Second format. The pause mode allow you to pause the Live TV picture and allows you to use the TimeShift function to rewind and fast forward the TV. Clicking the Stop button will stop the video you are recording or playing back. There are three buttons to control the watching, recording and pausing of TV. Clicking on the Pause button will cause the Pause menu to roll down from the WinTV application, while clicking on the Record button will cause the Record menu to roll down. Sound up - Page Up Sound down - Page Down Plus (+) - Chanel Up Minus (-) - Channel Down Ctrl T - Frame TV Ctrl P - Frame Print Ctrl F - Still image Ctrl M - Default settings Alt M - Re-size TV menu 0-9 - Channel number Space bar - Take a Snapshot WinTV-Scheduler, once it is set, can be closed, and the WinTV application will "wake up" at the desired time and tuned to the desired channel. After installation, WinTV-Scheduler can be found by going to Start / All Programs / Hauppauge WinTV. to set up an event for timed watching or recording , click on the Add Program. The items that need to be set for each event are: Source selection: leave set at WinTV to bring up the WinTV at the requested time and on the requested channel. The default time is about 3 minutes from the current time. Click on the hour to set the hour, the minute to set the minute to start the program. Leave this button unchecked to watch TV at the requested time. You can add more Events, clicking Set Program after each event is set. The WinTV program does not have to be running for the Schedular to work, but you PC need to be turn on. If WinTV is not running, it takes about 10 seconds to start WinTV and to start the recording of TV. In the WinTV application click on Menu then Suite Manager, then click on the Sources tab. [. . . ] If you select the Weekly option, select the day you would have the show recorded too. date to End: today date is the default. If you have selected Every day or Weekly option, you must change this date. Typically, the TV show programming change at summer, so do not enter a Date to End in years (except for the 8:00 PM News). [. . . ]