User manual HOTPOINT ECO8D 1492 K

[. . . ] νικά, 13 DE Deutsch, 25 Installation, 2-3 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data ES Español, 37 TK Türkçe, 49 Description of the washing machine, 4-5 Control panel Display Running a wash cycle, 6 Wash cycles and functions, 7 Table of wash cycles Wash functions Detergents and laundry, 8 Detergent dispenser drawer Preparing the laundry Special wash cycles Load balancing system ECO8D 1492 Precautions and tips, 9 General safety Disposal Opening the porthole door manually Care and maintenance, 10 Cutting off the water or electricity supply Cleaning the washing machine Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Troubleshooting, 11 Service, 12 1 Installation GB !This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/herself with its operation and features. Read these instructions carefully: they contain vital information relating to the safe installation and operation of the appliance. [. . . ] The actual duration can vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected. The duration of the wash cycles can be checked on the display. For all Test Institutes: * Test wash cycle in compliance with regulation EN 60456: set wash cycle with a temperature of 60°C. Wash functions This function is particularly useful for the removal of 3 stubborn stains. place extra compartment 3 (supplied) into compartment 1. When pouring in the bleach, be careful not 1 2 to exceed the “max” level marked on the central pivot (see figure). To run the bleach cycle on its own, pour the bleach into extra compartment 3, set the “Rinse” programme and activate the “Stain removal” programme. To bleach during a wash cycle, pour in the detergent and any fabric softener you wish to use, set the desired wash cycle and enable the “Stain removal” function. It cannot be used with the , , , , Pump out. MAX Stain removal At the end of the cycle the washing machine will perform slow rotations of the drum; the EASY IRON and START/ PAUSE indicator lights will flash (orange) and the text “END OF CYCLE” will appear on the display. To end the cycle, press the START/PAUSE button or the EASY IRON button. For the Silk/Curtains cycle, the machine will end the cycle while the laundry is soaking; the EASY IRON and START/PAUSE indicator lights will flash (orange) and the text “STOP WITH WATER” will appear on the display. To drain the water so that the laundry may be removed, press the START/PAUSE button or the EASY IRON button. It may not be used with the , , , , “Pump out” programmes. Fast wash Reduces the duration of the wash cycle, while making it possible to save water and electricity. It cannot be used with the , , , , , programmes. Extra rinse By selecting this option, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. It cannot be used in conjunction with the out” programmes. , , “Pump Easy iron By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. Eco wash The Eco Wash function saves energy by not heating the water used to wash your laundry - an advantage both to the environment and to your energy bill. Instead, intensified wash action and water optimisation ensure great wash results in the same average time of a standard cycle. For the best washing results we recommend the usage of a liquid detergent. [. . . ] Possible causes / Solutions: • The appliance is not plugged into the socket fully, or is not making contact. € The water inlet hose is not connected to the tap. • The START/PAUSE button has not been pressed. € The drain hose is not fitted at a height between 65 and 100 cm from the floor (see “Installation”). [. . . ]