User manual HOTPOINT ECOT6D 1491

[. . . ] Instructions for use WASHING MACHINE Contents GB English, 1 GB PL Polski, 13 FR Français, 25 Installation, 2-3 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data DE Deutsch, 37 CIS Русский, 49 Description of the washing machine, 4-5 Control panel Display How to open and shut the drum Running a wash cycle, 6 Load balancing system Wash cycles and functions, 7 ECOT6D 1491 Table of wash cycles Wash functions Detergents and laundry, 8 Detergent dispenser drawer Preparing the laundry Special wash cycles Precautions and tips, 9 General safety Disposal Saving energy and respecting the environment Care and maintenance, 10 Cutting off the water or electricity supply Cleaning your appliance Caring for your appliance door and drum Cleaning the pump Checking the water inlet hose How to clean the detergent dispenser Troubleshooting, 11 Service, 12 1 Installation GB !Keep this instruction manual in a safe place for future reference. Should the appliance be sold, transferred or moved, make sure the instruction manual accompanies the washing machine to inform the new owner as to its operation and features. Putting your appliance in place and moving it. [. . . ] Partial wash cycles Fast Spin (1st press of the button) Slow spin (2nd press of the button) Rinse cottons (1st press of the button) Pump out (2nd press of the button) 1400 800 1400 0  6 2, 5 6 6 16 12 36 2 30° 40° 0 800     1 1 56 65 The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected. For all Test Institutes: 1) Test Programmes according to 1061/2010: set wash cycle (90°C) with a temperature of 60°C and 40°C (By pressing the TEMPERATURE button). This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 60°C and 40°C. The actual washing temperature may differ from the indicated value. 2) Long wash cycle for cottons: set wash cycle (90°C) with a temperature of 40°C (By pressing the TEMPERATURE button). 3) Short wash cycle for cottons: set wash cycle (40°C). 4) Long wash cycle for synthetics: set wash cycle (60°C) (1st press of the button); with a temperature of 40°C (By pressing the TEMPERATURE button). Wash functions Prewash If this function is selected, the pre-wash cycle will run; this is useful for removing stubborn stains. : put the detergent in the relevant compartment. It cannot be used with the , , , , , programmes. Extra rinse By selecting this option, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. It cannot be used in conjunction with the , and “Pump out” programmes. Easy iron By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. The wash cycles ends with the laundry being left to soak in the machine; the EASY IRON and START/PAUSE indicator lights will flash (orange) and the text “STOP WITH WATER” will appear on the display. To drain the water so that the laundry may be removed, press the START/PAUSE button or the EASY IRON button. It may not be used with the , , , and “Pump out” programmes. Fast wash Reduces the duration of the wash cycle, while making it possible to save water and electricity. It cannot be used with the , , , , , programmes. Eco Wash The Eco Wash function saves energy by not heating the water used to wash your laundry – an advantage both to the environment and to your energy bill. Instead, intensified wash action and water optimisation ensure great wash results in the same average time of a standard cycle. For the best washing results we recommend the usage of a liquid detergent. [. . . ] Possible causes / Solutions: • The appliance is not plugged into the socket fully, or is not making contact. € The water inlet hose is not connected to the tap. • The START/PAUSE button has not been pressed. € The drain hose is not fitted at a height between 65 and 100 cm from the floor (see “Installation”). [. . . ]