User manual HOTPOINT FH 538 0

[. . . ] Reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass. [. . . ] Cooling ventilation In order to cool down the external temperature of the oven, some models are fitted with a cooling fan that blows out air between the control panel and the oven door. Once cooking has been completed, the cooling fan continues to operate until the oven has cooled down sufficiently. Oven light It goes on when selecting a cooking mode is selected. A cooking mode must be selected before programming can take place. Press the button several times until the icon and the three digits on the DISPLAY begin to flash. Use the “ ” and “ ” buttons to set the desired duration; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the value. Wait for 10 seconds or press the button again to finalise the setting. When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds. And a time of 1 hour and 15 minutes is programmed. Setting the end time for a cooking mode !A cooking duration must be set before the cooking end time can be scheduled. Follow steps 1 to 3 to set the duration as detailed above. Next, press the button until the icon and the four digits on the DISPLAY begin to flash. Use the “ ” and “ ” buttons to adjust the cooking end time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the desired value. Wait for 10 seconds or press the button again to finalise the setting. When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds. The Programming has been set when the DISPLAY shows the cooking end time and the cooking duration alternately. 21 The electronic programmer DISPLAY END OF COOKING icon DURATION icon DECREASE TIME button SET TIME button CLOCK icon TIMER icon INCREASE TIME button GB Cancelling a programme To cancel a programme: • press the button until the icon corresponding to the setting you wish to cancel and the digits on the display are no longer flashing. Press the “ ” button until the digits 00:00 appear on the display. € press and hold the “ ” and “ ” buttons; this will cancel all the settings selected previously, including timer settings. gRILL • Insert the rack in position 3 or 4. Place the food in the centre of the rack. [. . . ] Cleaning the oven door Clean the glass part of the oven door using a sponge and a non-abrasive cleaning product, then dry thoroughly with a soft cloth. Do not use rough abrasive material or sharp metal scrapers as these could scratch the surface and cause the glass to crack. For more thorough cleaning purposes, the oven door may be removed: 1. open the oven door fully (see diagram); 2. [. . . ]