User manual HOTPOINT FK 637J X/HA S

[. . . ] Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass. Never use steam cleaners or pressure cleaners on the appliance. WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock. Care should be taken to avoid touching heating elements. [. . . ] The END OF COOKING icon flashes continuously for 10 seconds after the most recent rotation. The programme can be confirmed by pressing the knob or letting the 10 seconds elapse, provided that a cooking time of at least 1 minute has been programmed. The END OF COOKING icon lights up to confirm programming has taken place successfully. Select the desired cooking mode using the SELECTOR knob. The oven switches on immediately and switches off at the set end of cooking time. To view the set programme, briefly press and release the knob; the pointers and icons will display the set programme. At the end of cooking, the END OF COOKING icon flashes and the alarm sounds for 1 minute (to silence it, briefly press the knob). ? For example: it is 9:00 and the cooking end time is set to 10:15. The programme begins immediately and stops automatically at 10:15, with a duration of 1 hour 15 minutes. Programming a cooking duration with delayed start Programming the cooking start time makes it possible to end cooking automatically in accordance with the programmed time. To programme the cooking start time, briefly press the knob once until the START OF COOKING icon begins to flash. BAKING mode The rear heating element and the fan are switched on, thus guaranteeing the distribution of heat in a delicate and uniform manner throughout the entire oven. This mode is ideal for baking temperature sensitive foods (such as cakes, which need to rise) and for the preparation of ?bitesize pastries?A cooking mode must be selected before programming can take place. Press the button several times until the icon and the three digits on the DISPLAY begin to flash. buttons to set the desired duration; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the value. Wait for 10 seconds or press the button again to finalise the setting. When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds. And a time of 1 hour and 15 minutes is programmed. Setting the end time for a cooking mode !A cooking duration must be set before the cooking end time can be scheduled. Follow steps 1 to 3 to set the duration as detailed above. [. . . ] ? The inside of the oven should ideally be cleaned after each use, while it is still lukewarm. Use hot water and detergent, then rinse well and dry with a soft cloth. ? All accessories - with the exception of the sliding racks - can be washed like everyday crockery, and are even dishwasher safe. Never use steam cleaners or pressure cleaners on the appliance. [. . . ]