User manual HOTPOINT FZ 1011 P.1 IX AUS

[. . . ] Operating Instructions OVEN Contents GB English, 1 GB DE Deutsch, 15 DK Dansk, 29 Installation, 2-3 Positioning Electrical connection Data plate Overall view Control panel NO Norsk, 43 SE Svenska, 57 Description of the appliance, 4 Start-up and use, 5-6 Control panel lock DEMO mode Setting the clock Setting the timer Starting the oven FZ 1011 P. 1 IX AUS Cooking modes, 7-10 Manual cooking modes Automatic cooking modes Programming cooking Practical cooking advice Cooking advice table Precautions and tips, 11 General safety Disposal Respecting and conserving the environment Care and maintenance, 12-13 Switching the appliance off Cleaning the appliance Cleaning the oven door Replacing the light bulb Automatic cleaning with the FAST CLEAN function Assistance, 14 Installation GB  Before operating your new appliance please read this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance.  Please keep these operating instructions for future reference. [. . . ] • Start the • Once baked, leave the loaves on one of the grill racks until they have cooled completely. 8 Programming cooking  A cooking mode must be selected before programming can take place. Programming the duration To set the duration of a manual cooking mode : Practical cooking advice  Do not place racks in position 1 and 5 during fanassisted cooking. This is because excessive direct heat can burn temperature sensitive foods.  In the BARBECUE and GRATIN cooking modes, particularly when using the rotisserie spit, place the dripping pan in position 1 to collect cooking residues (fat and/or grease). MULTILEVEL • Use positions 2 and 4, placing the food which requires more heat on 2. • Place the dripping pan on the bottom and the rack on top. bARBECUE • Insert the rack in position 3 or 4. Place the food in the centre of the rack. • We recommend that the power level is set to maximum. The top heating element is regulated by a thermostat and may not always operate constantly. For a crispy crust, do not use the dripping pan as it prevents the crust from forming by extending the total cooking time. • If the pizza has a lot of toppings, we recommend adding the mozzarella cheese on top of the pizza halfway through the cooking process. Press the button several times until the icon and the first digit on the TIME display flash. Press the "+" and "-" buttons to adjust the hour value. Press the digits on the TIME display begin to flash. Press the "+" and "-" buttons to adjust the minute value. And a time of 1 hour and 15 minutes is programmed. Programming delayed cooking  A cooking duration must be selected before delayed programming can take place. Follow steps 1 to 5 to set the duration as detailed above. Then press the two digits on the TIME display flash. Press the "+" and "-" buttons to adjust the hour value. [. . . ]  Never use the services of an unauthorised technician. Please have the following information to hand: • The message shown on the TEMPERATURE display. The latter two pieces of information can be found on the data plate located on the appliance. Apparaterne skal indsamles særskilt for at optimere omfanget af genanvendelse og genbrug af materialerne og for at forhindre eventuel skade på helbred og miljø. [. . . ]