User manual HOTPOINT FZ 1012 P.1 GIX 60HZ

[. . . ] 15 Operating Instructions OVEN Contents IT Italiano, 1 GB GB English, 16 FR Français, 31 Positioning Electrical connection Data plate Overall view Control panel Installation, 17-19 ES Espanol, 46 PT Português, 61 Description of the appliance, 20 Start-up and use, 21-22 Control panel lock DEMO mode Setting the clock Setting the timer Starting the oven FZ 101 P. 1 GIX 60Hz Cooking modes, 23-26 Manual cooking modes Automatic cooking modes Programming cooking Practical cooking advice Cooking advice table Precautions and tips, 27 General safety Disposal Respecting and conserving the environment Care and maintenance, 28-29 Switching the appliance off Cleaning the appliance Cleaning the oven door Replacing the light bulb Assembling the sliding rack kit Automatic cleaning with the FAST CLEAN function Assistance, 30 Installation  Before operating your new appliance please read this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance.  Please keep these operating instructions for future reference. [. . . ] Place the bowl inside and leave the dough to rise for approximately 1 hour (the dough should double in volume). • Cut the dough into equal sized loaves. • Place them in the dripping pan on oven paper. • Remember to pour 100 ml of cold water into the baking tray in position 5. For cleaning purposes, we recommend the use of water and vinegar. • Place the loaves inside the oven while it is still cold. • Once baked, leave the loaves on one of the grill racks until they have cooled completely. 24 Programming cooking  A cooking mode must be selected before programming can take place. Programming the duration To set the duration of a manual cooking mode 1. Press the button several times until the icon and the first digit on the TIME display flash. Press the "+" and "-" buttons to adjust the hour value. Press the digits on the TIME display begin to flash. Press the "+" and "-" buttons to adjust the minute value. And a time of 1 hour and 15 minutes is programmed. Programming delayed cooking  A cooking duration must be selected before delayed programming can take place. Follow steps 1 to 5 to set the duration as detailed above. Then press the button until the icon and the two digits on the TIME display flash. Press the "+" and "-" buttons to adjust the hour value. Press the digits on the TIME display begin to flash. Press the "+" and "-" buttons to adjust the minute value. And a time of 1 hour and 15 minutes is programmed and the end time is set to 12:30. And Programming has been set when the buttons are illuminated. [. . . ] Press the "+" and "-" buttons to adjust the minute value. And the Economy (ECO) FAST CLEAN mode level has been selected: default set time 1 hour. The TIME display shows the FAST CLEAN end time and duration alternately. to cancel a programmed procedure press the “START/ STOP” button. [. . . ]